Custom Cable Connection 22 AWG 4 Conductor Stranded Shielded Plenum Cable Black CL3P Jacket for Security/Alarm/Access Control/Sound - 1000 Foot Spool

This shielded wire is a great home improvement tool to have on hand and is an electrician’s best friend. The encasement of this 4-conductor cable meets certification requirements, so you can be sure it’s safe. Plenum cable runs in the plenum spaces of buildings or, in other words, the spaces typically used to wire heating and air conditioning systems. These spaces often lie between the structural ceiling and suspended ceiling or sometimes under a raised floor. The foil shielding included in this cable offers an extra layer of protection for the person installing it and guards against shorts or environmental damage of the wires. For added safety and security, we also recommend using an electrical conduit, which is a tube used to route the electrical wiring through a building or structure. Our stranded plenum cable is CMP-certified, meaning that the white jacket is suitable for installation in air plenum spaces. Additionally, CMP certification signifies that the cable has been stringently burn tested. This 22 AWG 4 conductor cable, with its overall shield and drain, is perfect for most of your in-wall wiring needs. We provide a variety of quantities in this useful plenum cable, including a 100-foot roll, a 500-foot spool, and a 1000-foot spool. Specifications: 4-stranded bare copper conductors Characteristic Impedance: 46.7 Ω (Nom.) Conductor Resistance: 16.90 Ohms/1000ft (Max.) @ 20°C CMP/FPLP black jacket and foil shield UL-listed, Article 800 Plenum Overall shield and drain Outer diameter is 0.13" 22 AWG braided cable Can support up to 300 volts Nominal Capacitance Conductor-to-Conductor = 33 pF/ft Nominal Capacitance Conductor-to-Other (Conds + Shield) = 59 pF/ft Max. Current = 2.2 Amps per Conductor at 25ºC Nominal Conductor DCR = 16.2 Ohm/1000ft