BC Battery Controller 700BCK9EDGE Controller BC K900 EDGE, Intelligent Battery Charger and Trickle Charger for BMW Motorcycles with CAN-Bus System, and for all 6V/12V Lead-Acid Batteries, 1 Amp

BC Battery Controller offers a range of battery chargers and trickle chargers, the only 100% Made in Italy chargers of the last generation that are among the safest and most advanced on the market. It performs 8 charging cycles fully automatically and it can be used to maintain and charge batteries used in automotive, car, vintage car, motorcycle, scooter, motorhome, power sports, garden and deep cycle applications. This range includes BC K900 EDGE, an intelligent battery charger and trickle charger with 3 selectable programs (6V, 12V and 12V CAN bus), which can be connected directly to the 12V DIN.4165 socket on all BMW motorcycles thanks to the 12V CAN bus program and the included adapter. With its maximum charging current of 1 amp, it is designed for the full maintenance of all types of conventional 6V and 12V batteries, from lead-acid to AGM batteries, from 1.2Ah to 100Ah. It charges much faster than standard chargers, with the BC Battery Controller products, the battery can last up to 8/10 years, it can repair sulphated batteries and fully discharged batteries from 1.25V (the lowest level on the market) and it is designed for use in micro hybrid vehicles equipped with start-stop system. BC K900 EDGE is powered by a state-of-the-art micro computer that monitors the safety and efficient charging of the battery. It automatically minimises energy consumption, it guarantees a high level of protection thanks to its Spark-Free system (spark-free) and is protected against overcharging, reverse polarity and short circuit. Fully automatic, it can always stay connected to the battery 24 hours a day, 7 days a week, so for whole months, even for years in a completely safe way. In addition, this product is super lightweight and thanks to its labelling, simple design and compactness and manageability, it is really suitable for everyone. Despite its compactness, it is equipped with a very robust case that prevents slipping and makes it resistant to scratches, drops, bumps, accidental squeezing, UV rays and water (IP44). The product comes with handy clamps, practical mounting eyelets that remain on the vehicle and an adapter for cigarette lighter socket and for 12 V DIN.4165 socket for BMW motorcycles. Thanks to the intuitive LED strip (which also ensures perfect night vision), BC K900 EDGE informs us about the battery charge status and the running cycle as well as the selected program (6V, 12V or 12V CAN bus). The product is covered by a 3 year warranty and a premium service directly from the factory, considering the very few cases treated. Box contents: 1 charger and trickle device BC K900 EDGE - Cable with eyelets (1 for the positive and 1 for the negative) - Cable with clamps (1 for the positive and 1 for the negative) - Universal cigarette lighter plug (if you remove the red cap, it will be compatible with the 12V-DIN4165-BCAN us us bushusususinstalled on BMW motorcycles) - Full instructions charging algorithm - BC K900 Edge - Phase 1 - Initialisation: it is checked whether one or more cells are short-circuited or whether the battery is in a correct condition and can be recharged/restored. - Phase 2 - Recovery: when the battery is extremely discharged (from 1.25V for 12V batteries, 0.63V for 6V batteries), the device tries to restore it to higher voltages compatible with the next phase. - Phase 3 - Light charging: when the battery is discharged, the device delivers a light pulsating current to the battery to overcome the critical phase. - Phase 4 - Main charging: during this phase, the battery charger delivers full power to the battery, which can regain up to 85-90% of its capacity. - Phase 5 - Desulphation / absorption: in this phase a "controlled overcharge" is delivered to the battery, which is able to restore the remaining 10-15% of the battery capacity, with a recovery/desulphurisation of the lead-acid cells (for medium or low desulphation). - Phase 6 - Battery analysis: the device stops the supply of power to the battery for a few minutes to check if the battery can receive the charge. This test is repeated regularly. - Phase 7 - Preservation: thanks to a specially designed electronic circuit, the battery charge is maintained even over long downtimes, without loss of water/electrolyte, overheating and overcharging phenomena. - Phase 8 - Balance: during long-term preservation, the device carries out a balance charge every 30 days to balance the cells of the battery and avoid the stratification of the electrolyte in the battery cells. BC K900 EDGE - FEATURES - 3 charging programs: 6 volt, 12 volt or 12 volt CAN bus. An LED bar always shows the active charging program. - Green/Red LED pair to indicate the current charge phase and possible error messages: - Green LED (CHARGE): running charging cycle (charging, desulphation, maintenance...); - Red LED (ERROR): diagnostic problem detected (reverse polarity, short circuit, battery not connected...). - Real-time monitoring of key battery parameters during each charg