Schneider Electric Wallbox Schneider Charge EVH5A11N2C5 Electric Car Charging Column T2 Cable 5m 6mA Detection App Control White

This Schneider Charge product is a wall mounted charging station for all electric vehicles that complies with the IEC61851-1 standard. The IP protection grade is IP55. The IK protection grade is IK10. The operating temperature is between -30°C and 55°C. The output type is a 5m fixed cable with a T2 socket at the end that installs at the bottom and top of the center of the station. The rated output power is 11 kW. The delivery is three-phase (3P+N). The rated charging current is 16A at 400VAC at a frequency of 50Hz/60Hz. It can be used with a TN-S, TT or IT grounding system. The charging station is easy to install (no special tools required). It is recommended for private use at home, installation in the garage or on an outdoor wall. The dimensions are (W) 244 mm x (H) 352 mm x (D) 107 mm. The product weight is 4.4 kg (without cable). Its colour is white (RAL 9003) and green. It is equipped with a built-in protection against DC fault current (RDC-DD as a residual direct current detecting device). There is no access control for using the charging station to charge an electric vehicle. An LED changes colour between red, green and blue to indicate the charging status directly on the charging station. This allows the maximum power assigned to the charging electric vehicle in real time to be adapted to the consumption of the other consumers in the house and the load can be adjusted to the off-peak times sent by TIC. The charging station is connected to Wiser via the Schneider ElectricTM mobile application for home energy management. It starts, monitors and controls the charging process easily from a distance. The OCPP 1.6 communication protocol can be used to connect to the monitoring device/third-party cloud. It can also be connected to an Internet home router via Wi-Fi or an RJ45 Ethernet cable.