Jende 1x6 Resin Diamond Sharpening Stone for Edge Pro, Hapstone, TSProf, Jende JIGS for Knives (3 Micron (6,000 Grit))

The 1x6 Jende Diamond Resin Stones come in 120 micron, 60 micron, 30 micron, 15 Micron, 9 Micron, 6 Micron, 3 Micron and 1 Micron which are equivalent to 120, 220, 500, 1K, 2K, 3K, 6K, and 15K grits, respectively. Diamond resin stones work on all steel types and even ceramic knives. Mounted to a standard 1x6" blank that fits the Jende JIGS for Knives, Edge Pro, Hapstone and TSProf guided sharpening systems. Abrasive Material: Diamond 120, 60, and 30 Micron (120-500 grit) are the perfect foundation stone for aggressive profiling and initial sharpening without the harshness of metal plates. 15 Micron (~1000 grit) is an excellent cleanup stone to remove deeper scratches left by coarser plates and stones. It can also be used for routine maintenance and sharpening. This stone leaves a very good working sharp edge. 9 Micron (~2,000 grit) further refines the edges from the 15 micron diamond resin stone, and can be used for light repair and general maintenance sharpening. It leaves an even better quality work sharp edge. The 9 micron diamond resin stone also begins to polish, and sets things up for further refinement sharpening and polishing. 6 Micron (~3,000 grit) really begins to refine and polish the edge leaving a high level of sharpness and with some very good shine. The 6 micron diamond resin stone is best for maintenance sharpening and preparation for full out mirrors and further refinement. 3 Micron (~6,000 grit) is a keystone slicing edges and mirror polishing. It is an excellent touching up stone, and really sets the edge up for further refinement through finer grit stone, stropping or Jende diamond films.