Airflow iCON 15 Extractor Fan Kit - 100mm/4 - Comes with Humidity/Timer Module, White Grille, PVC Hose - 19 l/s, 9.7W Energy Efficient | 3-Year Warranty

iCON 15 is ideal for toilets, en-suites, and small bathrooms. Recessed into the wall or ceiling, it is stylish, sleek and unobtrusive, even in the smallest of spaces. The circular design means no squaring up is required, adding to the already simple installation procedure. iCON 15 is designed to provide ventilation levels that comply with the latest Building Regulations. The iCON fan is an efficient, stylish and unique ventilation solution for the modern home. The iris shutter design makes switching on and off almost silent and helps reduce external noise ingress. The slim profile and iris shutter of the iCON make it a fan which will blend discreetly into any setting. The fan has cantilever fixing lugs which enable installation on uneven surfaces. iCON 15 is 230-240volt 50hz, IPX4 and has a flow rate up to 68mhr and a 3year warranty. The iCON 15 out of the box can be installed to work from a remote individual switch or a light switch. Also included in this kit is a humidity & timer module. This module will give the iCON the functionality of being activated by the level of humidity and a run on timer when activated by a remote switch. The humidity level on the module can be adjusted to suit but does come factory set out of the box to function for most wet room applications. When the humidity level is triggered the fan will come on and extract the moist air, it will carry on extracting until it is below the humidity level set on the module, this is to prevent nuisance triggering. The run on timer will function once the fan has been turned off by the remote switch, the fan will run on for the time set on the module. The module comes factory set for approx 15 minutes run on time as set by the English Building Regulations. The fan does not need to be connected to a remote switch for the humidity function to work. Also in this kit is 3metres of flexible PVC ducting and an external grille The white iCON 15 cover can also be changed so as to blend in better with the aesthetics of the room it is in. The choices are: Anthracite, Chrome, Sandstone and Silver. An external 3A fuse is required for each fan unit. The product is fully compliant with the following safety standards: CE2004/105//EMC Directives and LVD 2006 195/EC. Switches for fans should be selected and sited in accordance with BS7161:2008.