Maico Hygrostat HY 230 I - White - Wi-Fi - Minimalist Style - HVAC Control - 230V AC

Hygrostat HY 230. Contact voltage: 230 V. Contact load 10 A, protection class (IP) IP30, colour light white, RAL number 9010, height 71 mm, width 71 mm, depth 27 mm, the electronic hygrostat HY 230 or HY 230 I is used to dehumidify or moisten closed rooms. It is suitable for all living spaces and commercial premises, also for damp rooms such as bathrooms (during installation), bathrooms and dry rooms. The hygrostat detects the humidity in the room with an internal sensor and activates fans, heat recovery devices or dehumidifier or dehumidifier. The HY 230 or HY 230 I is either mounted directly to an UP socket or mounted to the wall via the APM HY 230 surface mounting kit. With a dip switch on the plate, the operating mode can be dehumidified (factory setting) or moistened when switched on. A red light diode in the housing indicates the switching status of the relay. Item: HY 230 I. Voltage type: alternating current, rated voltage: 230 V, output: 230 V, frequency: 50 Hz, protection rating: IP 30, relative humidity measurement range: 20% - 80% - surface mounting, material: Plastic; Material: Plastic - Colour: pure white RAL 9010. Weight: 0.1 g kg, Width: 71 mm, Height: 71 mm, Depth: 27 mm, Ambient temperature: 0°C to 50°C, Control: Indoor, Relative probe tolerance: 5%, Switching difference, Relative humidity: 2.5%, Max. Permissible switching current: 10A / 4A / COS PHI = 1, 230V AC / COS PHI = 0.6, 230V AC, max. Permissible starting current: 16A, suitable for built-in fans: No, suitable for roof fans: yes, suitable for pipe fans: yes, suitable for heat recovery systems: no, suitable for recessed wall fans: yes, suitable for house fans: yes, suitable for centrifugal fans: no, suitable for circulation fans: no. Safety Warning Please note that electrotechnical work is exclusively reserved for specialized electricians or must be carried out under the supervision and conduct of the latter.