Paint & Varnish Stripper for Wood, Metal, Plaster, Concrete & Glass - 1 x 500ml Paint Remover Solution Bartoline TX10 + 13 in 1 Paint Scraper Tool

This Paint stripper and scraper tool for Wood, Metal, Plaster, Concrete & Glass is a must-have for DIY painting and renovation projects. Containing 500ml of the trusted stripper formula along with a 13-in-1 painters tool and scraper, this set has everything needed to safely and effectively remove old layers of paint and varnish from wood, metal and more. The non-caustic stripper gently lifts paint and varnish without harming the underlying surface. The versatile 13-in-1 tool includes blades for scraping, chiselling, sanding and more, while the scraper tool helps remove loosened coatings. Measuring 13 inches, the multi-tool is comfortable to use for extended periods. With this excellent value kit, homeowners can strip, prepare and redo surfaces with ease. Pour a quantity of Bartoline TX10 Paint and Varnish Stripper into a suitable container. Apply a generous, thick even coat (do not brush out) at a rate of 1 litre per square metre, onto the surface to be stripped, with a suitable brush. Leave for approximately 1 hour and apply a second coat. For areas where there are less than 5 layers of paint or varnish, a second coat may not be necessary. Once the stripper has softened the paint, scrape off, leaving surface as clean as possible. Repeat process if necessary. Rub down stripped area using a scrubbing brush or stainless steel pad (DO NOT USE WIRE WOOL). Wash down stripped area with Bartoline Clean Spirit or detergent and water. Rinse with clean water and allow to dry.