Vortice VORTICE HRW40 Mono Evo HCS Ø 160 mm Heat Recovery with Remote Control, Mechanical Ventilation with Air Extractor, Air Exchanger for Humidity, Residential and Commercial Installation

Ventilation unit with decentralised heat recovery, for installation in residential and commercial premises of new buildings or subject to renovation for energy efficiency. Ideal, as well as ensuring proper air exchange, also to prevent excess moisture in the room and the emergence of mold on the walls. • Anti-shock and anti-UV plastic resin structure. • Nominal diameter: 160 mm. • Ceramic type hexagonal cell heat exchanger. High heat exchange efficiency (up to 90% at minimum air flow). • High-performance EC motor ventilator; five operating speeds to maximize performance, when needed, or minimize noise and consumption. • Relative humidity probe built into the product. • One-way remote control that allows you to set parameters or display useful product information. In detail: • Power on and off; • Selecting the 5 operating modes; • Fan speed selection; • Selecting the relative humidity threshold value that activates the Boost speed (three pre-defined levels that can be set to 50%, 65% and 80%); • Activation of the "Night" mode; • Reporting the condition of saturated filters. • Five different operating modes: • Continuous ventilation with heat recovery: the product extracts and cyclically inlets air to and from the room recovering the energy accumulated in the exchanger; • Ventilation in only air extraction: the stale air is extracted from the environment; • Ventilation in air intake: the product introduces renewal air into the environment. • Automatic: The recuperator automatically manages air flows according to the readings of the relative humidity sensor; • "Night": As light falls in the room, the product automatically forces the fan to turn at minimum speed, regardless of the relative humidity values detected. • Two air filters, an IsoCoarse 65% and a coarser pre-filter for powders, both easily removable for washing. • Mechanical quick release closure system built into the product chassis. • External rubber grille, can be installed from the outside via dowels or inserted from the inside, through the wall hole, without using external scaffolding. • Insect net that can be inserted into the duct from inside the room.