SCULPFUN S30 Laser Engraving Machine - Laser Cutter, Automatic Control Air Assist Kit, 0.05 mm Sculpture Precision for DIY Wood, Metal, Leather, Acrylic

Fine engraving laser head as S9: SCULPFUN S30 laser engraving machine uses ultra-fine laser shaping technology, laser focusing range: 0.06 x 0.6 mm, as thin as a hair, the engraving accuracy can reach 0.005 mm, which is twice as high as other engraving machines, it is more precise than the S9 laser and the engraving effect is better than the of the S9.

Ultra-high speed cutting: The SCULPFUN S30 laser engraving machine is equipped with an advanced air-assisted high-pressure metal nozzle that can create a high-pressure air flow under the air pump, which is five times faster than non-air-assisted cutting, and the speed can reach 4000 mm/min, so you do not have to wait long.

Automatic Air Assist System in Lightburn: The conventional air support system is always open during engraving and cannot be controlled, and the engraved pattern is smoked into a flaky mist. SCULPFUN S30 is equipped with an air-assisted 32-bit motherboard and a controlled air pump that can intelligently control the air-assisted switch via the M8 button of the Lightburn software. Engraving and cutting are very clean

Interchangeable protective lens: the laser of the S30 laser engraving machine uses an innovative interchangeable lens that significantly improves the life of the laser, which is more than ten times longer than other general lasers. If the lens is damaged or after prolonged use, the lens can be replaced to restore the cutting performance. Ein kostenloses Objektiv ist beim Kauf inbegriffen, sehr günstig und einfach bei SCULPFUN zu kaufen.

World's largest expandable engraving surface 935 x 905 mm (XY axis extension kit must be purchased separately). The original engraving surface of the SCULPFUN S30 laser engraving machine is about 400 x 400 mm, but you can buy the Y-axis extension kit to measure the engraving surface to 935 x 400 mm. buy The XY axis expansion kit. It can be upgraded to an engraving surface of 935 x 905 mm,