Amewi 22554 AMXRacing RXB7 Buggy 1:7 4WD RTR Blue

Product Description Super Scale Dune Buggy in 1:7 scale with the finest features and a final speed of up to 130 km/h (optionally with 8S LiPo). The RXB7 combines very high-quality components with an extreme drive concept and top features such as 2x 3S LiPo batteries included, a high-quality and precise 2.4GHz remote control, a LiPo charger and many milled aluminium parts. A handbrake that can be controlled via the transmitter, which allows the vehicle to drift perfectly in curves on dusty slopes, is only a highlight of this brachial buggy. The irrepressible power of the 4282 brushless motor with a specific speed of 2000 KV is finely controlled via a 150A regulator and is distributed via steel cardan shafts to the differentials and from there via steel CVD drive shafts to the 4 wheels (4WD). The strong steering servo with metal gear and a positioning force of 25 kg always ensures maximum performance and a very direct response of the steering on any surface. The two shock absorber bridges, the wishbone holder, steering lever and C-hubs as well as the chassis braces are CNC machined from high-quality aluminium. The chassis plate is made of solid 4 mm thick aluminium and ensures perfect rigidity of the chassis. Main gear and differential gear wheels are made of steel and guarantee a long service life. All gear parts are CNC milled for the highest accuracy of fit. In order to prevent overheating, both the motor and the 150A brushless controller are equipped with fans that counteract the heat generation generated while driving. The mechanical brake of the model is controlled with a 15 kg metal gear servo and this can be used in addition to the electric brake of the regulator to bring the model to a perfect drift angle. The specially developed 165 mm tyres ensure a very good balance of the vehicle and perfect grip level in addition to the fully adjustable chassis, the massive oil pressure shock absorbers. The beautiful body of the model made of sturdy polycarbonate is also visually an absolute cream piece, which gives the model a very aggressive and off-road typical look. The RXB7 is equipped with an LED lighting system, which can not only be switched on and off via the transmitter, but also allows different lighting modes. A very bright light strip on the roof of the buggy ensures perfect illumination of the track. Highlights: CNC Machined Steel Gears - For best performance, durability and power transmission, the HC7's gear parts are CNC machined from high-strength steel. 150A ESC - for sensitive control of the 2000KV brushless motor, a brushless controller specially programmed for the vehicle is used. Complete servo-controlled brake system (hand brake). Other features: Solid, torsion-resistant 4 mm aluminium chassis - for stable driving behaviour. Front and rear shock towers made of CNC-machined aluminium. Double. Chassis Chassis brbrbrMade of aluminium. High-quality and hardened CVD drive shafts made of steel. All transmission parts are made of high-quality steel. CNC-milled axle knuckle and steering lever made of milled aluminium. Vehicle fully ball bearings. The front and rear suspension can be easily and precisely adjusted and optimised for different surfaces. Waterproof receiver box tyres with perfect rubber compound for race and drift wishbone holder made of milled aluminium for maximum durability brushless high-performance motor with 2000 KV and double fan, high-performance controller with 150 A and XT90 connection, 2 x 3S LiPo battery with 5000 mAh and XT90 connection, metal gearbox, servos for steering and handbrake, high-quality 4. channel 2.4 channel channel GHz remote control with maximum range and sensitive control. Technical data: scale: 1:7. Length: 680 mm. Width: 380 mm. Height: 225 mm. Weight: approx. 6.2 kg. Wheel base: 419 mm. Front track width: 330 mm. Rear track width: 320 mm. Ground clearance: 55 mm. Front wheels: outer diameter/width 165/63 mm. Rear wheels: outer diameter/width 165/63 mm. Rim diameter: 90 mm. Gearbox: steel. Gear ratio: 15:1. Front damper: 102 mm. Rear damper: 102 mm. 002mm Bremse: Electronic and brake disc via 15 kg metal gear servo controlled. Regulator: 150 A ESC with XT90 connection motor: 4282 brushless motor with 2000 KV drive system: cardan shaft made of metal. Steering servo: standard servo with metal gear and 25 kg actuating force. Main material: metal. Battery compartment. Dimensions: 140 x 45 x 50mm Battery: 2 x LiPo, 3S, 11.1 V, 5000 mAh 35C, Softcase XT90 plug (L x W x H): 136 x 43 x 27 mm, weight: 340 g, driving time: approx. 10-15 min. Maximum speed: up to max. 130 km/h (with 2 x 4S LiPo batteries optional). Remote control: 4 channel 2.4 GHz remote control. Range: max. 400 m charger: BX3 balancer charger 220 V. Charging time: per battery approx. 3 – 4 hours. Box contents: model transmitter, 2 x battery 3S LiPo charger, decorative sheet, instructions DE/EN. Required accessories: 4 x 1.5 V AA batteries for the transmitter Safety Warning Please note: Not sui