Amewi 22556 AMXRock RCX10.3B Scale Crawler 6x6 Pick-Up 1:10 ARTR Black

The RCX10.3B is a high-quality 1:10 scale crawler that powerfully and at the same time sensitively trails its way through uneven terrain. In addition to the aluminium chassis, which promises a long service life thanks to first-class workmanship, the visually captivating scale body and the very soft tyres are stand out. Especially suitable for beginners and advanced hobby riders looking for a model with extreme terrain skills, this crawler offers a whole range of other features for extensive climbing tours: including a 2-speed gears, portal axles, metal drive shafts, locked differentials, a 550 brushed-engine and a Hobbywing WP880 Regulator including programming. Card Delivered as an ARTR version ("Almost Ready to Run"), the RCX10.3B is already ready to drive. For commissioning, only a suitable battery (7.2 V NiMh or 7.4 V Li-Po), a corresponding charger and batteries (4 x AA Mignon) for the remote control are required. To activate the undervoltage protection, the battery type used on the regulator is set. As the best drive battery, a 2S LiPo 7.4 V with min. 4000 mAh and Deans plug proven. The driving time is approx. 1 to 1.5 hours depending on driving style and surface. The included 2.4 GHz 4-channel remote control also operates the 2-speed transmission and the prepared LED lighting. The steering servo provides 15 kg of power in the basic version. The entire model is waterproof and thus defies all external conditions. Highlights: pre-assembled aluminium chassis, first-class workmanship for extreme durability. Very beautiful, black lacquered scale body including preparation for scale lighting. Extremely grippy and very soft crawler tyres, ready mounted on the rim. Other features 6 x 6 drive with metal drive shafts for perfect power transmission on any surface. Front and rear locked differentials for maximum power development in rough terrain. Extreme climbing Features thanks to perfect Weight distribution and low centre of gravity, 2-speed manual transmission, axle weights on the front axle, aluminium servo lever on the steering, hood lock on the underside: no visible body supports or holes in the hood, large battery compartment with quick release, motor holder made of metal, CVD drive shafts, portal axles on all three axles, technical data: 1:10, length: 630 mm, width: 24. 5 mm height chassis Is: 260 mm. Weight: approx. 4.2 kg. Wheelbase: 330/126 mm. Front track width: 210 mm. Rear track width: 210 mm. Ground clearance: 70 mm. Front wheels: outer diameter/width 116/42 mm. Rear wheels: outer diameter/width 116/42 mm. Rim diameter: 55 mm. Gearbox: 2-speed gear ratio. Gear:1:33.0 Gear Ratio 2. Gear: 1:13.4 front damper: length 95 mm oil pressure with knurled nut for spring tension damper rear: length 95 mm oil pressure with knurled nut for spring tension brake: electronic regulator: Hobbywing WP880 including programming card motor: 550 brushed-crawler motor drive system: gimbal steering servo: 15 kg metal gear JX Servdrive Switch servo: mini 0.9 kg MG main material: aluminium/plastic battery compartment dimensions: 160 x 48 x 30 mm battery: not included driving time: depending on the selected battery 30 to 120 minutes maximum speed: approx. 20 km/h in the second gear. Remote control: 4-channel, 2.4 GHz. Operating frequency: 2410 to 2472 MHz / 20 dBm. Range: approx. 150 m charger: not included. Charging time: depending on battery type and selected charger. Box contents: model remote control instructions (English language not guaranteed) DE/EN tool required accessories: 4 x AA AA batteries 1.5 V for remote control battery (e.g. item no. 28934) charger (e.g. item no. 28402 or 28403) Safety Warning Please note: Not suitable for children under 3 years. Contains small parts that can be swallowed.