ClearSpa Hot Tub Flush 5L - Spa System Flush 5ltr, Hot Tub Flush Cleaner - breaks down and removes biofilm build up, dirt, oils, unpleasant smells from your internal spa & hot tub pipes

Spa & Hot Tub Flush should be used before the water is de-commissioned / drained down (typically no longer than 12 weeks for domestic spas and hot tubs) although heavy use will require more frequent drain downs. This product is formulated to internally clean all the pipework and fittings and will also loosen biofilms which can provide an ideal environment for harmful viruses and bacteria to live. Instructions 1. Remove all filters and erosion feeders prior to application of product and ensure filters are thoroughly cleaned before re-installation 2. Ensure all covers are removed / in the open position during the application process. 3. Ensure water level is at normal operating height so that product is circulated thorough-out the system 4. Turn on all pumps / boosters pumps and pour 250ml of product directly into the main skimmer / filter compartment. This dose will treat up to 1750lts of water. 5. Open all circulation valves and run pumps for a minimum of 15 minutes 6. Turn off all pumps / circulation and let water stand for 15 minutes 7. Turn on all pumps and booster pumps for a further 15 minutes (some foaming may be experienced during this time) 8. Drain water and flush jets and spa / hot tub surface with fresh water to remove any stubborn deposits. 9. Re-fill with fresh water and commission in the normal manner 10. Ensure recommend sanitiser levels are added as per manufacturer guidelines. 11. It is recommended this process is carried out at least every 3 months (12 weeks) for domestic hot tubs up to moderate usage, for heavy usage increase dosage to every 6 weeks. For commercial application a minimum of a weekly application will be required. PRECAUTIONS Always ensure bathers are out of the water when adding chemicals. Never mix with any other chemicals including cleaning products, weed killers and chlorine products, as a dangerous reaction may occur. Always handle products in a well-ventilated area. Always wash hands thoroughly after handling chemica Directions Spa & Hot Tub Flush should be used before the water is de-commissioned / drained down (typically no longer than 12 weeks for domestic spas and hot tubs) although heavy use will require more frequent drain downs. This product is formulated to internally clean all the pipework and fittings and will also loosen biofilms which can provide an ideal environment for harmful viruses and bacteria to live. Instructions 1. Remove all filters and erosion feeders prior to application of product and ensure filters are thoroughly cleaned before re-installation 2. Ensure all covers are removed / in the open position during the application process. 3. Ensure water level is at normal operating height so that product is circulated thorough-out the system 4. Turn on all pumps / boosters pumps and pour 250ml of product directly into the main skimmer / filter compartment. This dose will treat up to 1750lts of water. 5. Open all circulation valves and run pumps for a minimum of 15 minutes 6. Turn off all pumps / circulation and let water stand for 15 minutes 7. Turn on all pumps and booster pumps for a further 15 minutes (some foaming may be experienced during this time) 8. Drain water and flush jets and spa / hot tub surface with fresh water to remove any stubborn deposits. 9. Re-fill with fresh water and commission in the normal manner 10. Ensure recommend sanitiser levels are added as per manufacturer guidelines. 11. It is recommended this process is carried out at least every 3 months (12 weeks) for domestic hot tubs up to moderate usage, for heavy usage increase dosage to every 6 weeks. For commercial application a minimum of a weekly application will be required. PRECAUTIONS Always ensure bathers are out of the water when adding chemicals. Never mix with any other chemicals including cleaning products, weed killers and chlorine products, as a dangerous reaction may occur. Always handle products in a well-ventilated area. Always wash hands thoroughly after handling chemicals.