AQUASPARKLE pH Increaser 1kg Granular Spa Water Treatment Chemical

Sold by pool and spa center; official specialist dealer of aquasparkle products aquasparkle ph plus is a granulate product that is used to adapt the ph of the water upwards. Compatible with all spa disinfectants. 1 kg. Ideal ph range: 7.2 7.6 test the ph value of your spa water and if it is below 7.2, use aquasparkle ph plus to increase it. Instructions loosen the product in a clean plastic container with a maximum rate of 10 g product per 0.2 gallons clean warm water. Stir well to ensure that the product is completely dissolved. Carefully insert the resulting solution into the spa while the pump is switched on. Check the ph value after at least 30 minutes and, if necessary, repeat the treatment until the ideal ph is determined. Dosing rates 1,000 liters, 220 galles, 11 g dosing rate 1,500 liters, 330 galles, 17 g dosing rate please note: various treatments may be required. Directions Loosen the product in a clean plastic container with a maximum rate of 10 g product per 0.2 gallons clean warm water. Stir well to ensure that the product is completely dissolved. Carefully insert the resulting solution into the spa while the pump is switched on. Check the pH value after at least 30 minutes and, if necessary, repeat the treatment until the ideal pH is determined. Dosing rates: 1,000 liters, 220 galles, 11 g; dosing rate 1,500 liters, 330 galles, 17 g. Please note: various treatments may be required.