Airflow iCON 15 Extractor Fan - 100mm/4" - with Plug in Timer Module, 3 Years Warranty

Airflow iCON ECO 15 240V 100mm Extractor Fan Outlet iCON 15 is ideal for toilets, en-suites, and small bathrooms. Recessed into the wall or ceiling, it is stylish, sleek and unobtrusive, even in the smallest of spaces. The circular design means no squaring up is required, adding to the already simple installation procedure. iCON 15 is designed to provide ventilation levels that comply with the latest Building Regulations. The iCON fan is an efficient, stylish and unique ventilation solution for the modern home. The iris shutter design makes switching on and off almost silent and helps reduce external noise ingress. The slim profile and iris shutter of the iCON make it a fan which will blend discreetly into any setting. The fan has cantilever fixing lugs which enable installation on uneven surfaces. iCON 15 is 230-240volt 50hz, IPX4 and has a flow rate up to 68mhr and a 3year warranty. The iCON 15 out of the box can be installed to work from a remote individual switch or a light switch. If you require more functionality from your iCON then you will need to purchase a plug in module. These plug in modules are inserted under the cover which twists off. The additional functionality available for this fan by way of a plug in module are: pull cord, run on timer, humidity with run on timer, motion sensor with run on timer, motion sensor with humidity and run on timer, continuous running, delay start and 2 speed with humidity and pull cord boost. The white iCON 15 cover can also be changed so as to blend in better with the aesthetics of the room it is in. The choices are: Anthracite, Chrome, Sandstone and Silver. An external 3A fuse is required for each fan unit. The product is fully compliant with the following safety standards: CE2004/105//EMC Directives and LVD 2006 195/EC. Switches for fans should be selected and sited in accordance with BS7161:2008. Airflow TM iCON Plug-in Timer Module for 240V Fan The module concept which is unique to iCON, gives one the option of determining how you wish to control your fan and based on your requirement select the appropriate module. Airflow has invested extensively in the research and development of our modules to bring our customers the most versatile controllability available in the extractor fan market. Our extensive range of control functions has helped the iCON product range become the leading brand it is today. The same module is compatible with all three size iCON's - 15, 30 and 60. However, it should be noted that there are specific 240V modules and different low voltage SELV modules. Replacing a module is also a lot simpler and cheaper than replacing the entire fan. This run on timer module (72612601) is for use in the 230v - 240v iCON 15 (72683501) iCON 30 (72591601) iCON 60 (72591701) only. This module will give the iCON the functionality of a run on timer, so once the fan has been turned off by the remote switch the fan will run on for the time set on the module. The modules come factory set for approx 15minutes run on time as set by the English Building Regulations. This module should only be installed by an approved and qualified person and in line with the instructions that come with each module.