Airflow iCON ECO 15 240V 100mm Extractor Fan Outlet, White & 72573602 iCON PCM Plug-in Pull-Cord Module for 230V Fan,White

Airflow iCON ECO 15 240V 100mm Extractor Fan Outlet , White iCON 15 is ideal for toilets, en-suites, and small bathrooms. Recessed into the wall or ceiling, it is stylish, sleek and unobtrusive, even in the smallest of spaces. The circular design means no squaring up is required, adding to the already simple installation procedure. iCON 15 is designed to provide ventilation levels that comply with the latest Building Regulations. The iCON fan is an efficient, stylish and unique ventilation solution for the modern home. The iris shutter design makes switching on and off almost silent and helps reduce external noise ingress. The slim profile and iris shutter of the iCON make it a fan which will blend discreetly into any setting. The fan has cantilever fixing lugs which enable installation on uneven surfaces. iCON 15 is 230-240volt 50hz, IPX4 and has a flow rate up to 68mhr and a 3year warranty. The iCON 15 out of the box can be installed to work from a remote individual switch or a light switch. If you require more functionality from your iCON then you will need to purchase a plug in module. These plug in modules are inserted under the cover which twists off. The additional functionality available for this fan by way of a plug in module are: pull cord, run on timer, humidity with run on timer, motion sensor with run on timer, motion sensor with humidity and run on timer, continuous running, delay start and 2 speed with humidity and pull cord boost. The white iCON 15 cover can also be changed so as to blend in better with the aesthetics of the room it is in. The choices are: Anthracite, Chrome, Sandstone and Silver. An external 3A fuse is required for each fan unit. The product is fully compliant with the following safety standards: CE2004/105//EMC Directives and LVD 2006 195/EC. Switches for fans should be selected and sited in accordance with BS7161:2008. Note: The fan iris/shutter opens by activation of the brown actuator, which heats up and pushes onto a white plastic clip, which in turn opens the fan iris/shutter. All these components must be aligned correctly when installing the fan and particularly when fitting the cover onto the fan, as incorrect fitment will give a false impression that the fan does not work. We enlist the services of a qualified electrician to install the product in line with our manufacturing installation instructions. The fan is designed to have a slow opening iris/shutter, so that the fan remains as quiet as possible when activating or switching off. The iris/shutter has not been designed to open instantaneously. After installing the fan, it must be powered off and the brown actuator fully retracted before fitting the cover. Failure to do so will result in the iris/ shutter not opening or closing fully. This can also break the white plastic clip. In addition, as per our manufacturing installation instructions where the fan is installed into the ceiling, then it must be installed with a backing board between the joists to prevent vibration and excessive noise. The fan is designed to be no louder than 28.8db which is equivalent to whisper quiet. Airflow 72573602 iCON PCM Plug-in Pull-Cord Module for 230V Fan,White The module concept which is unique to iCON, gives one the option of determining how you wish to control your fan and based on your requirement select the appropriate module. Airflow has invested extensively in the research and development of our modules to bring our customers the most versatile controllability available in the extractor fan market. Our extensive range of control functions has helped the iCON product range become the leading brand it is today. The same module is compatible with all three size iCON's - 15, 30 and 60. However, it should be noted that there are specific 230V modules and different low voltage SELV modules. Replacing a module is also a lot simpler and cheaper than replacing the entire fan. This plug in pull cord module (72573602) is for use in the 230v iCON 15 (72683501) iCON 30 (72591601) iCON 60 (72591701) only. This module will give the iCON the functionality of being able to turn the fan on and off at the fan. The pull cord will hang down from under the fan and switches the fan on and off when pulled and released. This module should only be installed by an approved and qualified person and in line with the instructions that come with each module.