Cuprinol WATER BASED WOOD PRESERVER CLEAR 5L

Cuprinol Wood Preserver is a water-based, colourless, general-purpose preserver for interior* or exterior use. It gives deep penetrating protection to sound wood against decay, mould and blue-staining fungi. Before application remove excessive dirt and soiling, large areas of algae, lichen or fungi using an appropriate fungicidal wash or cleaner designed for the job. Wood that has been wood-stained, painted or vanished should be stripped back to bare wood and treated as bare wood. Do not use this product to treat wood destined for in ground contact use. Ensure that timber used in ground contact has been pre-treated especially for such use. *Occasionally wet or interior wood with risk of condensation. Specification: Coverage: 1L covers up to 5m² with 2 coats, 5L covers up to 25m² with 2 coats Drying Time: 16 hours Directions 1. Remove excessive dirt and soiling, large areas of algae, lichen or fungi using an appropriate fungicidal wash or cleaner designed for the job. 2. Strip back wood-stained, painted or vanished wood to bare wood and treat as bare wood. 3. Apply the preserver with a brush or roller, ensuring even coverage. 4. Allow the preserver to penetrate the wood for 15-30 minutes. 5. Wipe off any excess preserver. 6. Wait 16 hours for the preserver to dry before applying a second coat if necessary. 7. Ensure timber used in ground contact has been pre-treated especially for such use.