PrimaCreator PC-EPETG-175-4x0500-STD EasyPrint PETG, 1.75 mm, 4 x 500 g

EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colours offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET. EasyPrint PETG has very good interlayer adhesion which makes it extremely easy to print with. If you have a heated build plate we suggest that you use a temperature around 40-60 ?C Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned. Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool. EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.