PrimaCreator PC-EPLA-175-4x0500-NEON EasyPrint PLA, 1.75 mm, 4 x 500 g, Neon

EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up. Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better. Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° - 220° EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned. Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool. EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content."