Seawhisper Ceramic Tap Cartridge Tap Valve Cartridge Quarter Turn Tap Valve Gi Replacement Brass Insert Gland Cartridge Quarter Turn

Measurements--Height (brass to Brass) 53mm / Diameter at thread 23.8mm / Splines 20 / Nut Height 10mm，Also drilled and threaded to fit for a 4mm screw. All Size information can be seen visually in the picture of ceramic tap valve. If you are not sure whether they will fit your tap, you can turn water off, take cartridge out and check dimensions against product schematic on amazon page.

Notice--Here are so many sizes of these tap valve cartridge,Please check dimensions before purchase.you can remove the old cartridge and measure it, then compare it to our ceramic disc cartridges.you know when you change a new one，they may be identical visually,but it's the dimensions that matter.

No more drips--Did the job of stopping kitchen tap from dripping and saved a bomb in not having to replace the tap.

Comes with fixed washers--Makes ceramic tap cartridge very easy to use and seal the tap good.

Excellent value--We provide a pair of quarter turn tap valve.According to people's using habit. Clockwise open one: Turning clockwise for tap on, turning anti-clockwise for tap off. Usually used on the left hand side for hot water tap. Anti-clockwise open one: Turning anti-clockwise for tap on, turning clockwise for tap off. Usually used on the right hand side for cold water tap.