Schellenberg 20018 Radio Module

Witt the wireless reception module from Schellenberg you can retrofit your roller shutter motors and awning motors with a convenient wireless controller both quickly and cost-effectively. With the practical wireless controller you can operate your roller shutters or awnings very conveniently with a hand-held wireless remote control (not included in the scope of delivery). The wireless reception module is suitable for all Schellenberg STANDARD roller shutter motors and STANDARD awning motors with mechanical end position adjustment. It is also suitable for tubular motors from other makers if their end positions are set mechanically. Advantages for the retrofitting of roller shutter motors and awning motors with convenient wireless operation for tubular motors with mechanical end position adjustment Controller with Schellenberg hand-held wireless remote control for roller shutters and awnings compact construction, simple installation (flush mount) for flush mount sockets with a diameter of 60 mm and a depth of 40 mm for branch boxes (IP 54) in the roller shutter box can also be used also for awning tubular motors outdoors with branch box (IP 65) various control options With a radio reception module from Schellenberg you can control the following functions of a tubular motor for roller shutters and awnings: Pairing of the radio receiver module with a hand-held wireless remote control Changing the direction of rotation of the motor Opening and closing the roller shutters or awning Stopping the tubular motor Control of the radio reception module with a hand-held wireless remote control or with a wireless time switch You can operate the radio reception module with various control elements: with a wireless time switch or a hand-held wireless remote control. You can decide for yourself which control element best suits your personal needs. For that reason no controller is supplied as standard. Areas of application for the retrofitting of roller shutter motors and awning motors with convenient wireless operation for tubular motors with mechanical end position adjustment Flush mount installation for flush mount sockets with a diameter of 60 mm and a depth of 40 mm for branch boxes (IP 54) in the roller shutter box can also be used also for awning tubular motors outdoors with branch box (IP 65) Technical data Dimensions: 51 x 51 x 27 mm Supply voltage: 230V / 50Hz Switching current: 1A / 230 VAC inductive load Rated load: max. 300 W inductive load Protection class: IP 20 Stand-by power: approx. 0.4 Watts Radio frequency: 868.4 MHz Permissible temperature range: -20° C to +50° C Installation type: flush mount socket, Ø 60 mm hole spacing, min. 40 mm depth Surface mount in the appropriate housing, outdoors in a housing with IP65 protection class Installation notes Installation type: flush mount socket, Ø 60 mm hole spacing, min. 40 mm depth Surface mount in the appropriate housing, outdoors in a housing with IP65 protection class Operation only via Schellenberg hand-held wireless remote control (part Nos. 20015, 20016, 20019, 20020) Scope of delivery 1 Wireless reception module 1 Installation instructions 1 Terminal block