PeakTech 1205-2-Channel Handheld Digital Oscilloscope (20 MHz) and True RMS Multimeter (4000 Counts) with USB Interface and 3.8" Color Display, DSO, Record Length 6K, Case and Accessories

20MHz/2CH ~ 100MS/s ~ Handheld Oscilloscope with Digital Multimeter This combination of a digital 2-channel/20 MHz storage oscilloscope and a True RMS multimeter is an ideal solution for any measuring needs. The creative shortcut design simplifies operation and with the 3.8 inch TFT colour display in high resolution (640 x 480 pixels - 65535 colours), the curves can be easily observed while the lithium-ion battery with its long service life ensures continuous work. This makes the device ideal for modern measuring environment and on-site measurements. USB interface. Connection for USB stick for portable data storage. Supports alternative triggers. Video trigger function and optimisation of trigger sensitivity. Storage capacity: 6K True RMS Multimeter Two galvanically separated channels (either multimeter or between oscilloscope and multimeter) USB interface. Automatic range adjustment and auto setup function in oscilloscope mode. 5 V 1 kHz output for adjusting the test probes. Safety: EN 61010-1; CAT II 400 V Accessories: AC-DC adaptor, pack of 2 probes, test leads, expansion module for small capacity measurements, connection cable for USB mass storage, USB interface cable, software CD for Windows 2000/XP/VISTA/7, case and user manual Bandwidth: 20 MHz Sampling Rate: 100MSa/s per Channel Channels: 2 Display: 3.8" TFT color display 65535 colors Resolution: 640 x 480 pixels Input Pairing: DC, AC, GND Input impedance: 1MΩ ± 2% parallel to 20pF ± 5pF / 400V DC or ACss Vertical sensitivity: 8 bit (2 channels at the same time) Max. Input voltage: 400V DC or ACss DC accuracy: ± 5%. Input Pairing: DC, AC, GND Rise time: < 17.5 ns Time base: 5ns/div ~ 100s/div Sampling range: 10 S/s ~ 100 MS/s Accuracy: 100ppm Trigger type: edge, video, alternate. Trigger mode (edge): auto, norm, single Trigger sensitivity: DC, AC, LF-REJ, HF-REJ Automatic Measurement: peak peak, cycle RMS, Vmax, Vmin, Vtop, Vbase, vamp, overshoot, preshoot, rise time, fall time, +width, -width, +duty, -duty, delay A-B (rising), delay A-B (falling), frequency, period meaning. Memory length: 6000 points/CH Curve memory: 4 waveforms, 4 settings Math. Function: +, -, *, / FFT function: available Interface: USB device 2.0, USB host 1.1 Digital multi-meter USB. DC Voltage: 400mV/4/40/400V; ±1%+1 digits. AC voltage: 4/40/400V; ± 1% + 3 digits. 40 - 400 Hz. DC Current: 40/400mA/10A; ±1.5%+1 digits. AC Current: 40/400mA/10A; ±1.5%+3 digits. 40 - 400 Hz. Resistance: 400Ω/4/40/400KΩ/4/40MΩ; ±1%+1 digits. Capacity: 51.2 nF ~ 100 µF; ± 3% + 3 digits. Operating voltage: 7.4V/3500mA DC Li-ion battery or AC adapter 110/240V AC; 50/60Hz, 8.5V DC/1.5A Dimensions (W x H x D): 115 x 180 x 40 mm Weight: 650g