RUKO Ruko HSSE-Co 8 Bi-Metal Hole Saw with Fine Toothing, White Finish, 121.0 mm Diameter, R126121

RUKO Dual-metal Hole Saws are used in hand-held and upright drills. In column drilling machines, use only manual feed. Dual-metal Hole Saws, HSS Co 8 with fine teeth The fine toothing is particularly well suited for metals. It ensures a smoother running and less effort. Low heat generation during the cutting increases the life of metals. Suitable for unalloyed and alloyed steels (up to 1000 N/mm strength), chromium-alloyed steels such as VA, stainless and acid resistant steels, non-ferrous and light metals. Features: Stable construction. Hole saws and shaft in two parts, hence fast assembly and change of different hole saw diameters. Positive rake angle and interface provide an aggressive cut The teeth are welded to a body made of special steel Good chip removal. Lateral slots in the body help to remove the cut parts. Replaceable centre drill. Stable construction Hole saws and shaft in two parts, hence fast assembly and change of different hole saw diameters. Positive rake angle and interface provide an aggressive cut The teeth are welded to a body made of special steel Good chip removal Lateral slots in the body help to remove the cut parts. Replaceable centre drill Instructions for use: Not suitable for percussion drilling. Drill with light and even pressure Avoid oscillations Observe speed table Use coolant Technical data: Diameter: 121.0 mm Cutting depth: up to 38.0 mm For hanging holder: A2/A6/A7 Cutting: HSS Co 8 Teeth: Fine teeth Body: Special steel right cutting Packing unit: in carton packagingDelivery is without cradle. This is available separately as an accessory