RUKO Ruko HSSE-Co 8 Bi-Metal Hole Saw with Fine Toothing, White Finish, 127.0 mm Diameter, R126127

HSS Co 8 bi-metal hole saw with fine teeth. The fine toothing is particularly well suited for metals. It ensures a smoother running and less effort. Low heat generation during the cutting increases the life of metals. Suitable for unalloyed and alloyed steels (up to 1000 Newtons/mm² strength), chromium-alloyed steels such as VA, stainless and acid resistant steels, non-ferrous and light metals. Product details: Hole saw diameter: Diameter: 127.0 mm Cutting depth: up to 38.0 mm Cutting: HSS Co 8 Tooth type: Fine teeth Body: Special steel Right-handed cutting Features: Stable construction. Hole saws and shaft in two parts, hence fast assembly and change of different hole saw diameters. Positive rake angle and interface provide an aggressive cut The teeth are welded to a body made of special steel Good chip removal. Lateral slots in the body help to remove the cut parts. Replaceable centre drill. Stable construction Hole saws and shaft in two parts, hence fast assembly and change of different hole saw diameters. Positive rake angle and interface provide an aggressive cut The teeth are welded to a body made of special steel Good chip removal Lateral slots in the body help to remove the cut parts. Replaceable centre drill Instructions for use: Not suitable for percussion drilling. Drill with lightweight and uniform contact pressure. Avoid oscillations Observe speed table Use coolant