We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
£63.20
Trend CraftPro Traditional Torus Router Cutter, 1/2 Inch Shank, 37mm Cut Diameter & 40mm Cut Length, 13.5mm Radius, Tungsten Carbide Tipped, Bearing Guided, C260X1/2TC
C260X1/2TC
Price data last checked 173 day(s) ago - refreshing...
We'll watch every seller, every day. One email when your price arrives.
Same price for 8 weeks. Today is much like next week.
£63 for 54 days straight · last change was Oct 2025
NEW HERE?
Amazon shows you one price. We show you all of them.
Tosheroon watches Amazon prices so you don't have to. Every product on Amazon has a price history — we make it visible. Set the price you'd actually pay, and we'll email you the second it gets there. No app, no account, one email.
WHAT'S ON THIS PAGE
when this has been cheap or pricey
where the price is heading next
all-time high & low, recent range
name your number, we'll email you
Price History & Forecast
Grey patches = out of stock. Cheaper = lower on the chart. Hover for exact prices.
Last 558 days • 558 data points (No recent data available)
Price Distribution
Price distribution over 558 days • 5 price ranges
Price Analysis
Most common range: £57-65 (488 days, 87.5%)
Price range: £42 - £81
Price levels: 5 price ranges over 558 days
Key Features
BEAD AND CORNER MOULD CUTTER: Designed for woodworking, this router cutter allows crafting of detailed decorative beads and corner mouldings to enhance your finished piece by incorporating intricate details.
TUNGSTEN CARBIDE TIPPED: 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
PTFE NON-STICK COATING: Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
PRECISION CUTTING: The highly ground tip face is polished to 800-grit to ensure accurate cutting with a fine finish for professional routing results.
SAFETY & COMPATIBILITY: Longer shanks accommodate both handheld and table routers. Features a Safety K-Mark for optimal shank positioning. EN Shank Markings for visible cutter safety data.
Product Specifications
- Brand
- Trend
- Model
- C260X1/2TC
- Format
- DIY & Tools
- ASIN
- B005ASO6PM
- Category
- DIY & Tools > Power, Garden & Hand Tools > Power Tool Accessories > Router Accessories & Parts
- Domain
- Amazon UK
- Listed Since
- 06 August 2012
Barcode
No barcode data available
Similar Products You Might Like
Trend CraftPro Corner Bead Router Cutter, 1/2 Inch Shank, 38.1mm Cut Diameter & 26mm Cut Length, 9.5mm Radius, Tungsten Carbide Tipped, Bearing Guided, C216X1/2TC
Trend
Trend CraftPro Staff Bead Router Cutter, 1/4 Inch Shank, 5.2mm Radius and 20mm Cut Diameter, Tungsten Carbide Tipped, C070X1/4TC
Trend
Trend CraftPro Bearing Guided Corner Bead Router Cutter, 1/4 Inch Shank, 31.9mm Cut Diameter, 22.5mm Cut Length, 7mm Radius, Tungsten Carbide Tipped, C215X1/4TC
Trend
Trend CraftPro Corner Bead Router Cutter, 1/4 Inch Shank, 26mm Cut Diameter & 16mm Cut Length, 4.8mm Radius, Tungsten Carbide Tipped, C130X1/4TC
Trend
Trend CraftPro Corner Bead Router Cutter, 1/4 Inch Shank, 22.3mm Cut Diameter & 14mm Cut Length, 3.2mm Radius, Tungsten Carbide Tipped, C140X1/4TC
Trend
Trend CraftPro Bearing Guided Corner Bead Router Cutter, 1/2 Inch Shank, 31.9mm Cut Diameter & 22.5mm Cut Length, 7mm Radius, Tungsten Carbide Tipped, C215X1/2TC
Trend
Trend CraftPro Guided Profiler Router Cutter, 1/2 Inch Shank, 19.05mm Cut Diameter & 63mm Cut Length, Tungsten Carbide Tipped, C165BX1/2TC
Trend
Trend CraftPro Profile Scriber Router Cutter Bit, 1/2 Inch Shank, 3.5mm Radius and 41mm Cut Diameter, Tungsten Carbide Tipped, C156X1/2TC
Trend
Trend Professional Guided Thumb Mould Router Cutter, 1/2 Inch Shank, 69.2mm Cut Diameter, 16mm Cut Length, Tungsten Carbide Tipped, 46/42X1/2TC
Trend
Trend CraftPro Guided Profiler Router Cutter Bit, 1/4 Inch Shank, 19.1mm Cut Diameter & 16mm Cut Length, Tungsten Carbide Tipped, C290X1/4TC
Trend
Trend CraftPro Guided Profiler Router Cutter Bit, 1/2 Inch Shank, 25mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, C166BX1/2TC, Black
Trend
Trend CraftPro Guided Profiler Router Cutter Bit, 1/2 Inch Shank, 50mm Cut Diameter & 24.2mm Cut Length, Tungsten Carbide Tipped, C214X1/2TC
Trend
Trend CraftPro Profiler Router Bit 1/4" Shank, 12.7mm Dia, Carbide Tip
Trend
Trend CraftPro Guided Profiler Router Cutter Bit, 1/2 Inch Shank, 18mm Cut Diameter & 50mm Cut Length, Tungsten Carbide Tipped, C165AX1/2TC
Trend
Trend CraftPro Guided Profiler Router Cutter Bit, 12mm Shank, 19.1mm Cut Diameter & 50mm Cut Length, Tungsten Carbide Tipped, C166X12MMTC
Trend
Trend Professional Bearing Guided Architrave Router Cutter, 16mm Radius, 8mm Shank, 40mm Cut Diameter & 29.5mm Cut Length, Tungsten Carbide Tipped, 46/401X8MMTC
Trend
Trend Professional Bevel Trim Router Cutter, 27mm Diameter, 9mm Length, 45-Degree, 1/4 Inch Shank, Tungsten Carbide Tipped, 46/6BX1/4TC
Trend
Trend CraftPro Cavetto Router Cutter Bit, 1/4 Inch Shank, 4.8mm Radius and 31mm Cut Diameter, Tungsten Carbide Tipped, C065X1/4TC, Silver
Trend
Trend CraftPro Guided Profiler Router Cutter Bit, 1/4 Inch Shank, 9.5mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, C121PX1/4TC
Trend
Trend Professional Double Overlap Router Cutter, 90-Degree, 18mm Diameter, 1/4 Inch Shank, Tungsten Carbide Tipped, 46/7X1/4TC
Trend
Trend CraftPro Bearing Guided Thumb Mould Router Cutter, 1/2 Inch Shank with 44mm Radius, Carbide Tipped, C190X1/2TC
Trend
Trend CraftPro Bearing Guided Ovolo Router Cutter, 1/2 Inch Shank with 25.4mm Radius and 32mm Cut Length, Carbide Tipped, C079BX1/2TC
Trend
Trend Professional Bearing Guided Ovolo Router Cutter, 6.3mm Radius, 3.2mm Step, 1/4 Inch Shank, Two Alternative Bearings, Tungsten Carbide Tipped, 40/13X1/4TC
Trend
Trend CraftPro Aquamac 21 Recesser Router Cutter Bit, 1/2 Inch Shank, 46.3mm Cut Diameter, Tungsten Carbide Tipped, Bearing Guided, C207X1/2TC
Trend