We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
£44.50
Trend CraftPro Staff Bead Router Cutter, 1/4 Inch Shank, 5.2mm Radius and 20mm Cut Diameter, Tungsten Carbide Tipped, C070X1/4TC
Black, C070X1/4TC
Price data last checked 115 day(s) ago - refreshing...
We'll watch every seller, every day. One email when your price arrives.
Same price for 7 weeks. Today is much like next week.
£45 for 50 days straight · last change was Dec 2025
NEW HERE?
Amazon shows you one price. We show you all of them.
Tosheroon watches Amazon prices so you don't have to. Every product on Amazon has a price history — we make it visible. Set the price you'd actually pay, and we'll email you the second it gets there. No app, no account, one email.
WHAT'S ON THIS PAGE
when this has been cheap or pricey
where the price is heading next
all-time high & low, recent range
name your number, we'll email you
Price History & Forecast
Grey patches = out of stock. Cheaper = lower on the chart. Hover for exact prices.
Last 616 days • 616 data points (No recent data available)
Price Distribution
Price distribution over 616 days • 5 price ranges
Price Analysis
Most common range: £42-45 (466 days, 75.6%)
Price range: £29 - £45
Price levels: 5 price ranges over 616 days
Key Features
BEAD AND CORNER MOULD CUTTER: Designed for woodworking, this router cutter allows crafting of detailed decorative beads and corner mouldings to enhance your finished piece by incorporating intricate details.
TUNGSTEN CARBIDE TIPPED: 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
PTFE NON-STICK COATING: Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
PRECISION CUTTING: The highly ground tip face is polished to 800-grit to ensure accurate cutting with a fine finish for professional routing results.
SAFETY & COMPATIBILITY: Longer shanks accommodate both handheld and table routers. Features a Safety K-Mark for optimal shank positioning. EN Shank Markings for visible cutter safety data.
Product Specifications
- Brand
- Trend
- Model
- C070X1/4TC
- Colour
- Black
- Format
- DIY & Tools
- ASIN
- B0052XQS3S
- Category
- DIY & Tools > Power, Garden & Hand Tools > Power Tool Accessories > Router Accessories & Parts
- Domain
- Amazon UK
- Listed Since
- 28 May 2010
Barcode
No barcode data available
Similar Products You Might Like
Trend CraftPro Corner Bead Router Cutter, 1/4 Inch Shank, 26mm Cut Diameter & 16mm Cut Length, 4.8mm Radius, Tungsten Carbide Tipped, C130X1/4TC
Trend
Trend CraftPro Corner Bead Router Cutter, 1/4 Inch Shank, 22.3mm Cut Diameter & 14mm Cut Length, 3.2mm Radius, Tungsten Carbide Tipped, C140X1/4TC
Trend
Trend CraftPro Bearing Guided Corner Bead Router Cutter, 1/4 Inch Shank, 31.9mm Cut Diameter, 22.5mm Cut Length, 7mm Radius, Tungsten Carbide Tipped, C215X1/4TC
Trend
Trend CraftPro Bearing Guided Corner Bead Router Cutter, 1/2 Inch Shank, 31.9mm Cut Diameter & 22.5mm Cut Length, 7mm Radius, Tungsten Carbide Tipped, C215X1/2TC
Trend
Trend CraftPro Corner Bead Router Cutter, 1/2 Inch Shank, 38.1mm Cut Diameter & 26mm Cut Length, 9.5mm Radius, Tungsten Carbide Tipped, Bearing Guided, C216X1/2TC
Trend
Trend CraftPro Traditional Torus Router Cutter, 1/2 Inch Shank, 37mm Cut Diameter & 40mm Cut Length, 13.5mm Radius, Tungsten Carbide Tipped, Bearing Guided, C260X1/2TC
Trend
Trend Professional Bearing Guided Corner Bead Router Cutter, 1/4 Inch Shank, 22mm Cut Diameter, 12.7mm Bearing Diameter, 3.2mm Radius, 9/71X1/4TC
Trend
Trend CraftPro Profile Scriber Router Cutter Bit, 1/2 Inch Shank, 3.5mm Radius and 41mm Cut Diameter, Tungsten Carbide Tipped, C156X1/2TC
Trend
Trend Professional Guided Staff Bead Router Cutter, 1/2 Inch Shank, 35.2mm Cut Diameter, 35mm Cut Length, 9.5mm Radius, 46/56X1/2TC
Trend
Trend CraftPro Profiler Router Bit 1/4" Shank, 12.7mm Dia, Carbide Tip
Trend
Trend Professional Staff Bead Nosing Router Cutter, 1/4 Inch Shank, 24mm Cut Diameter, 10mm Cut Length, 5mm Radius, 9/11X1/4TC
Trend
Trend Professional Bearing Guided Corner Bead Router Cutter, 1/2 Inch Shank, 28mm Cut Diameter, 16mm Bearing Diameter, 4.8mm Radius, 9/72X1/2TC
Trend
Trend Professional Bearing Guided Corner Bead Router Cutter, 1/4 Inch Shank, 28mm Cut Diameter, 16mm Bearing Diameter, 4.8mm Radius, 9/72X1/4TC
Trend
Trend CraftPro Cavetto Router Cutter Bit, 1/4 Inch Shank, 4.8mm Radius and 31mm Cut Diameter, Tungsten Carbide Tipped, C065X1/4TC, Silver
Trend
Trend CraftPro Guided Profiler Router Cutter Bit, 1/4 Inch Shank, 9.5mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, C121PX1/4TC
Trend
Trend CraftPro Guided Profiler Router Cutter Bit, 12mm Shank, 19.1mm Cut Diameter & 50mm Cut Length, Tungsten Carbide Tipped, C166X12MMTC
Trend
Trend CraftPro Cavetto Router Cutter Bit, 1/4 Inch Shank, 9.5mm Radius and 28.5mm Cut Diameter, Tungsten Carbide Tipped, C062X1/4TC
Trend
Trend Professional Bearing Guided Corner Bead Router Cutter, 1/4 Inch Shank, 23mm Cut Diameter, 16mm Bearing Diameter, 2mm Radius, 9/70X1/4TC
Trend
Trend Professional Double Guided Sunk Bead Router Cutter, 1/4 Inch Shank, 19.1mm Cut Diameter, 6.4mm Cut Length, 3.2mm Radius, 8/51X1/4TC
Trend
Trend CraftPro Guided Centre Leg Pile Router Cutter Bit, 1/4 Inch Shank, 31.9mm Cut Diameter & 2.5mm Cut Length, Tungsten Carbide Tipped, C225X1/4TC
Trend
Trend CraftPro Chamfer Router Cutter Bit, 1/4 Inch Shank, 13mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide Tipped, C300X1/4TC
Trend
Trend CraftPro Chamfer Router Cutter Bit, 1/2 Inch Shank, 38mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide Tipped, C045BX1/2TC
Trend
Trend CraftPro Guided Rounded Over Router Cutter Bit, 1/4 Inch Shank, 11.1mm Radius and 15.9mm Cut Length, Tungsten Carbide Tipped, C078X1/4TC
Trend
Trend CraftPro Guided Rounded Over Router Cutter Bit, 1/4 Inch Shank, 4.8mm Radius and 12.7mm Cut Length, Tungsten Carbide Tipped, C075X1/4TC
Trend