Price loading...

AWWA C510-17(R21) Double Check Valve Backflow Prevention Assembly

Environmental

Price data last checked 26 day(s) ago - will refresh soon

View at Amazon

Price History & Forecast

No Price Data Available

Price history will appear here once data is collected from Amazon.

Price Distribution

No price data available for histogram

Description

This standard describes the double check-valve backflow prevention assembly for potable water applications. The assembly shall be capable of withstanding a working water pressure of at least 150 psi (1,034 kPa) without damage to working parts or impairment of function and for operation on hot or cold potable water lines. This standard describes hot- and cold-water double check-valve backflow prevention assemblies. Assemblies shall be designed to operate, at a minimum, at a temperature range of 33°F–140°F (1°C–60°C). Hot-water assemblies shall be designed to operate, at a minimum, in water at a temperature range of 33°F–180°F (1°C–82°C). A complete assembly consists of two internally loaded, independently operating check valves, located between two tightly closing resilient-seated shutoff valves, with four properly placed resilient-seated test cocks (see Sec. 4.3.1.3).

Product Specifications

Format: paperback
ASIN: 1647170710
Category: Books > Subjects > Science, Nature & Maths > Engineering & Technology > Civil Engineering > Environmental
Domain: Amazon UK
Release Date: 28 February 2022
Listed Since: 21 March 2022

Barcode

No barcode data available

AWWA C510-17(R21) Double Check Valve Backflow Prevention Assembly

Price History & Forecast

No Price Data Available

Price Distribution

Description

Product Specifications

Barcode

Similar Products You Might Like

AWWA C511-17(R21) Reduced-Pressure Principle Backflow Prevention Assembly

AWWA C621-18 Internal Pipe Joint Seal Assemblies for Water Service

AWWA C507-18 Ball Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm)

M51 Air Valves: Air Release, Air/Vacuum, and Combination, Second Edition (Manual of Water Supply Practices)

C514-15 Air Valve and Vent Inflow Preventer Assemblies for Potable Water Distribution System and Storage Facilities

C504-15 Rubber-Seated Butterfly Valves

AWWA C516-21 Large-Diameter Rubber-Seated Butterfly Valves Sizes 78 In. (2 000 mm) and Larger

AWWA C521-18 Plastic Ball Valves

AWWA C561-21 Fabricated Stainless-Steel Slide Gates

C507-15 Ball Valves, 6 in. Through 60 in. (150 mm Through 1,500 mm)

C517-16 Resilient-Seated Cast-Iron Eccentric Plug Valves

AWWA C560-21 Cast-Iron Slide Gates

Boiler Water Treatment: Principles and Practice: Charts and Notes for Field Use

M44 Distribution Valves: Selection, Installation, Field Testing, and Maintenance, Third Edition (Manual of Water Supply Practices)

Water Quality & Treatment Handbook

M66 Cylinder and Vane Actuators and Controls--Design and Installation (Awwa Manual) (AWWA Manuals of Practice)

AWWA C562-21 Fabricated Aluminum Slide Gates

AWWA D110-13 (R18) Prestressed Concrete Water Tank Standard

The Safety Relief Valve Handbook: Design and Use of Process Safety Valves to ASME and International Codes and Standards (Butterworth-Heinemann/IChemE)

Maintenance of Process Instrumentation in Nuclear Power Plants (Power Systems)

Practical Boiler Water Treatment Handbook

Handbook for Heat Exchangers and Tube Banks design

Piping and Pipeline Calculations Manual: Construction, Design Fabrication and Examination