Mut 703002188 Pressure Reducer

The pressure reducer to place compensated Mut RP (2 of attacks available diameters: 1/2 "M, 3/4" M series) are of installed devices to automatic operation, easily adjustable/tarabili that, on public water water private network, reduce and stabilize the pressure in input from the network. This pressure in variable input, in general, would be too high and in time for proper operation of domestic installations. Excessive pressure and development of the same not stable, may give rise to problems of tears, malfunctions and excessive water consumption. The pressure reducer Mut RP Series offers a very stable output pressure and still under the limits laid down by the European legislation UNI-EN 1567. The brass cw626 N – dezincificazione – with which they are made, minimizes damage from corrosion resistant in water, even if the facilities of local supply were cause this phenomenon (also suitable in condition described by en 806 – 2 A.1). Moreover, the brass mpiegato cw626 N meets the more stringent Indications For Absolute to help improve the characteristics of drinking water for human use. (in agreement to the "positive list 'written by 4 ms). Technical Data Fluid: Water PN Max – Maximum upstream of the pressure reducer pressure: 16 bar field adjustable calibration (water pressure for power to the home network) factory calibration: 1 ÷ 6 bar pressure: 3 bar upper limit the temperature of the fluid: 75 °C coefficient of reach [M3/h]: KVS Mod. RP 1/2 ": KVS = 3.15; MOD. RP 3/4 ": KVS = 3.60 scale of the manometer (Cod. 7.030.02114/7.030.02115): 0 – 10 bar meets the standard Comply with the norm: en 1567 valve body materials: brass antidezincificazione cw626 N (cuzn33pb1.5alas) lid: Brass CW617 N Uni en 12165 shutter: Pom (polyoxymethylene): EPDM membrane required: EPDM PEROX filter and location: Stainless Steel AISI 304 – En 10088.