BNnYY OBD2 dash cam power cable USB C ,OBD to Type-C Adapter Hardwire Kit with 24/7 Parking Mode, Low Voltage Protection (11.6V/23.4V) with 2 Modes Switch , Acc Detection, Plug and Play Continuous Recording

Smart Dual-Mode Switch for Dash Cam Toggle the physical switch to choose between: Daily Mode 0 (auto power-off ~20 minutes after engine shut-off) and 24/7 Surveillance Mode - (continuous parking monitoring). A versatile OBD2 power adapter for dash cam.

11.6V/23.4V Smart Low-Voltage Protection Built-in chip monitors battery voltage in real-time. Automatically cuts power when voltage drops below 11.6V (12V vehicles) or 23.4V (24V vehicles), preventing a dead battery.

Plug & Play in 3 Minutes – No Tools Needed Skip complex hardwiring. This OBD power cable for dash camera plugs directly into your vehicle's OBD-II port. The 3.5-meter cable allows for easy, clean, and hidden installation.

Frees Up Cigarette Lighter & 100% Data Safe Powers your dash cam directly, freeing your 12V socket. It only draws power and does NOT access or interfere with your vehicle's ECU data or diagnostics.

Important Compatibility Notes Your dash cam must have a USB-C power input. It must use the A5-B5 pin definition. NOT compatible with devices requiring A8-B8 pins or 12V input.

Key Usage Note & Vehicle Compatibility Some vehicles cut power to the OBD/ODB port when off. If no power after startup, simply drive to ~20 km/h (12 mph) to activate it. This OBD2 dash cam power cable is designed to work with this common vehicle logic.

Stable 5V/3A Output with Circuit Protection Delivers stable 5V/3A power to prevent dash cam restarts or video lag. Includes protection against over-current and short-circuit issues.

Clean Setup & Reliable Performance Achieve a tidy interior by hiding the cable. For optimal performance, avoid parking in areas with continuous, heavy vibration. A reliable OBD2 power adapter for seamless operation.