Cyberpower CyberPower OLS1500ERT2UA-N Double-Conversion Online UPS 1500VA 1350W, with Network Card, Tower/Rack 2U Black, Pure Sine Wave, ECO Mode >95% Efficiency, Colour LCD, USB HID, 8X IEC C13, 19 Inch Rail

Seamless StromqUA-N-N-Blity for Critical Loads: The Online Double-Conversion Topology delivers a continuously processed output power with pure sine wave and 0ms switching time, ideal for sensitive IT and automation loads. With 1500 VA and 1350 W as well as power factor 0.9, you can supply devices stably even in the event of mains failLow distortion supports precise electronics: THD <3% at linear load and THD <5% for non-linear load, plus vertex factor 3:1 for dynamic load peaks

Wide input and generator capable: The single-phase UPS operates with nominal 230 Vac +/-10% and a wide input voltage range of 160 to 300 Vac, so that even fluctuating networks are reliably intercepted. For graduated loads, an adjustable range of up to 80 Vac at low load is available, at 100% load 160 to 300 Vac. Auto frequency detection for 50 or 60 Hz, input power factor 0.99 and active PFC compatibility support modern power supplies, plus generator compatibility for demanding applications

8 outputs with load groups and robust protection concept: A total of 8x IEC C13 outputs are available, all designed for battery backup and surge protection. They control the supply via separate load segments with 4 critical load outputs and 4 non-critical load outputs, prioritizing important systems. The internal bypass works automatically and manually and maintains the supply even in the event of maintenance. Overload protection combines internal current limitation, circuit breaker and fuse, with clear limit areas for mains operation, battery operation and bypass operation

Transparent monitoring and interfaces for integration: The colour LCD shows operating mode, power, battery status, load, error and warnings as well as event and log and allows direct configuration of mode, alarm, input and output as well as battery settings. The HID compatible USB port allows you to connect the UPS in management environments, and a relay dry contact is available for special applications. An EPO port supports emergency shutdown. Acoustic alarms inform when battery operated, low battery status, overload, over temperature, UPS error and battery change, software PowerPanel Business 4 is recommended

Battery system with expandability and quieter control: the maintenance-free lead gel batteries typically deliver 15.3 minutes at half load and 5.3 minutes at full load, the typical charging time is 4 hours at a maximum of 1.5 A charging current. Starting in battery operation and intelligent battery management support operation, replacement is possible by qUA-N lified personnel, replacement battery set RBP0169. External battery modules are automatically detected, compatible with BPSE48V40ART2U with up to 3 EBM.