Makita DLX2563T 18V Li-ion LXT 2 Piece Combo Kit, Complete with 2 x 5.0 Ah Batteries and Charger, Supplied in a Tool Bag

Makita is the leading manufacturer of professional power tools on the market. The DLX2563T is an 18V Li-ion LXT 2 piece kit, comprising DHP490Z 18V Li-ion LXT Brushless Combi Drill, DHR202Z 18V Li-ion LXT Rotary Hammer SDS-Plus, 2 x BL1850B 18V LXT 5.0 Ah batteries and DC18RC charger. The DHP490Z is a compact and lightweight cordless Combi Drill, powered by 18V Li-ion LXT slide type battery (not included), to supply energy to the powerful 18V brushless motor, with variable speed controlled by trigger and 2 mechanical gears, to deliver 0-1,900 0 0-500 rpm, 0-28,500 - 0-7,500 ipm, 65 Nm maximum torque, 50 Nm maximum torque hard joint, 27 Nm maximum torque soft joint and 460W maximum output power for a wide range of applications. The DHP490Z is for use in confined and narrow spaces, equipped with 3 modes for drilling, hammer drilling and screwdriving, 20 torque settings, 2 mechanical speeds; high speed mode for light duty applications and low speed mode for heavy duty applications, 13mm single sleeve keyless chuck with a 1.5 to 13mm chuck capacity, LED job light with pre-glow and afterglow functions, reverse switch and electric brake. The DHP490Z has a trigger lock function at neutral position. 13mm maximum drilling diameter in masonry, 13mm in steel, 38mm in wood with auger bit, 38mm in wood with self-feeding bit, 51mm in wood with hole saw and 70mm in siding board. The DHR202Z Rotary Hammer SDS-Plus is powered by 18V Li-ion LXT slide type battery (not included), to supply energy to the powerful 18V motor, with variable speed controlled by trigger, to deliver up to 1,100 rpm, 4,000 bpm and 2.0 J impact energy for fast, efficient drilling. The DHR202Z is equipped with a conveniently located push button for forward and reverse, depth gauge for increased drilling consistency, one touch sliding chuck for quick and easy bit installations and removals and triple operation mode for rotary only, hammer with rotary and hammer only. The DHR202Z has a side handle with elastomer soft grip, electric brake for increased operator safety and built in torque limiter to disengage the motor if the bit binds. The DHR202Z features rotation mode; the chisel can rotate a full 360 degrees with 40 different locking positions and rubber joint construction; to suppress transmission of vibration to the battery to minimise battery failures due to terminal breakage or poor electrical contact.