Nuby Rapid Cool & Sterilise Portable Bottle Making Kit – Includes RapidCool & RapidSterilise - Formula Feed in 2 Minutes | UV Steriliser | Kills 99.9% of Bacteria in 1 Minute (White)

How do I clean and sterilise the RapidCool™ lid? The digital lid should be cleaned in warm, soapy water. After cleaning, the lid should be sterilised by UV sterilisation or cold-water sterilisation. You can also sterilise the RapidCool™ digital lid when out and about using hot water from your insulated flask. The RapidCool™ lid must glow Nuby red when attached to the flask to indicate the water is at the correct temperature. Keep the flask upside down to make sure the water is in contact with the lid for at least 30 seconds, then the lid will be safe to use! How do I sterilise the RapidCool™ base? You can do this via UV sterilisation, cold water sterilisation, steam sterilisation or in a dishwasher. Never steam sterilise in a microwave. Can I mix formula with the boiled water immediately or do I have to wait for the water to cool down to 70°C? No, you don’t have to wait! The freshly boiled water can and should be used immediately for the safest feed. The NHS guidelines state that the water should be no less than 70°C, but this does not mean that you must wait for it to reach this temperature first before mixing with formula. Mixing formula with freshly boiled water is the safest way to feed, as it ensures any harmful bacteria are eliminated! How do I know when the RapidCool™ is ready to use again? The RapidCool™ works by absorbing heat from hot liquids. After being exposed to heat, it will require a minimum of 3 hours before being ready to use again. The flask should feel cool to the touch.