Paicreate Universal-TV-Remote Universal TV Remote Control for Samsung Sony LG Vizio RCA Toshiba Sharp Hitachi Haier TCL Toshiba Philips JVC TV

Compatible Models: Samsung, Sony, LG, Vizio, RCA, Toshiba, Sharp, Hitachi, Haier, TCL, Toshiba, Philips, JVC TVs, etc. Setup Steps: ① Find your TV's code in the code list. ② Press and hold the SETUP button until the red light on the remote illuminates. ③ Press and release the selected device button on the remote (TV/STR/AUD button). ④ Enter the first four digits of your device's code. ⑤ Aim the remote at the device and test the buttons. Tip:If a button doesn't work properly, repeat steps 2-5, entering the next code for your device, until each button works properly. Pairing Copy Guide: This remote control is six-in-one, and each device button has a second device. ◎Code input: 1. Press [SET] and don't let go. After 3 seconds, the light will turn on. Let go. 2. Enter the 4-digit code. If the code is entered correctly, turn off the light and exit. If the code input is wrong, it will flash twice and exit. 3. Press [SET] to exit, or automatically exit without a button in 30 seconds; ◎Manual search: 1. Press [SET] and don't release it. After 3 seconds, the light will turn on. Let go. 2. Press the [POWER] key to enter the search, send 10G code numbers forward, press [VOL+]/[VOL--], add (subtract) the current code and send the POWER key value, and update the code once each time you press it. If POWER has no code value, send the PLAY code. 3. Press the device key to save and exit, and the light will turn off. 4. Press [SET] to flash 5 times to exit. During the search process, you can test other key codes. ◎System reset: 1. Press [SET] and don't let go. After 3 seconds, the light will turn on. Let go. 2. Enter the code 9999, flash the light twice, and restore to the factory state; ◎System reset 2: 1. Press [SET] and don't let go. After 3 seconds, the light will turn on. Let go. 2. Press the [MUTE] key and flash it. 3. Press the [0] key to flash the backlight twice to restore to the factory state. ◎Volume learning: 1. Press the indicator light of the device you want to learn and let go. 2. Press [SET] and don't let go. After 3 seconds, the light will turn on. Let go. Press the [MUTE] key and flash it. 3. Press [VOL+]--> turn on/[VOL-]--> turn off, and the light will flash twice and then turn off. Note: After turning off the volume learning function, the VOL+\VOL-\MUTE key without code value under the current device will automatically send the code value of the TV, and the power is turned off by default. Note: After turning on the volume learning function, the VOL+\VOL-\MUTE key under the current device will send the code value of the specified device. ◎Signal source key learning: 1. When the signal source button of the current device (non-TV device) has no code value, the code value of the TV will be automatically sent. ◎Multimedia key learning: 1. When there is no code value for the multimedia key of the current device, it will be learned from the code value of the multimedia key of the last (non-TV) device key. Note: Multimedia keys include FEW, PLAY, PAUSE, FF, STOP, REC