CAT DX17 Impact Drill 750W 13mm | 3000 RPM | 48000 BPM | 3-in-1 Drill Hammer Screwdriver | 30mm Wood 16mm Masonry | Variable Speed | Lock-On | Depth Gauge Included

Robust Power, Three-Mode Versatility, Built for Every Challenge — The CAT DX17 750W Impact Drill Whether you're drilling anchor holes into masonry, boring clearance holes through structural timber, driving screws into hardwood, or extracting stuck fixings from steel, the CAT DX17 750W Impact Drill is built to handle it all with confidence and precision. Combining a powerful 750-watt motor with three operating modes, variable speed control, and a professional-grade 13mm metal keyed chuck, the DX17 is the dependable, versatile corded drill that earns its place permanently in any toolkit — professional or DIY. 750 Watts of Sustained Drilling Power The DX17 is driven by a 750-watt motor delivering a no-load speed of 3,000 RPM and an impact rate of 48,000 beats per minute — a combination of rotary speed and percussive force that handles the full range of drilling materials efficiently and without hesitation. Whether working through the soft resistance of pine, the moderate density of brick, or the hard face of reinforced concrete, the DX17 maintains consistent power output throughout each drilling cycle, producing clean, accurate holes without the motor bogging down under load. Three Modes, One Tool — Maximum Versatility The 3-in-1 mode selector is what elevates the DX17 above a standard single-function impact drill. Impact drill mode engages simultaneous rotation and percussive impact — the combination needed for fast, efficient drilling through all masonry materials including concrete, brick, block, and stone. Drill mode disengages the impact mechanism entirely, providing clean rotary drilling in wood and steel where percussive action would cause splintering, tear-out, or damage to precision hole edges. Screwdriving mode combined with the forward/reverse selector makes the DX17 a capable and practical screwdriving tool — driving self-tapping screws, machine screws, and wood screws efficiently while the reverse function backs out stuck bits and extracts difficult fixings without the need for a separate screwdriver or impact driver. Precision Speed Control for Every Application The variable speed trigger provides smooth, progressive control from zero to the full 3,000 RPM — a level of speed control that makes a measurable difference to the quality and accuracy of results across every material and bit type. Slow-speed starts prevent bit wander on smooth metal surfaces and avoid tear-out on timber veneers and laminates, while progressive speed increase allows the operator to match drilling pace precisely to material density, bit diameter, and hole quality requirements. The lock-on switch maintains selected speed without continuous trigger pressure, reducing hand fatigue significantly during extended drilling sessions on large projects. A Chuck Built for Professional Demands The 13mm metal keyed chuck with 1/2" thread represents a deliberate quality choice. Metal chuck construction provides superior grip strength, dimensional precision, and long-term durability over plastic keyless alternatives — maintaining consistent bit concentricity and grip security through years of demanding use and thousands of bit changes. The keyed design delivers maximum clamping force for a positively secure bit grip that holds firmly even during sustained heavy impact drilling in the most resistant materials, where lesser chuck designs can allow bit slip under load. Drilling Capacity That Covers Every Trade Task Maximum capacities of 30mm in wood, 16mm in masonry, and 13mm in steel provide the reach needed to handle the complete range of drilling requirements across construction, renovation, electrical, plumbing, and carpentry work. Anchor holes in brickwork, cable routes through timber joists, clearance holes in structural steel sections, and fixing holes in MDF and engineered boards — the DX17 handles all of them from a single, compact, lightweight tool that weighs just 1.8kg. Comfort and Control for the Long Haul The rubber overmould grip wraps the handle in a vibration-absorbing, non-slip surface that keeps the drill comfortable and controllable throughout extended drilling sessions — reducing the cumulative hand and wrist fatigue that prolonged drilling inevitably generates. The auxiliary handle provides essential two-handed stability and torque control during heavier drilling tasks in masonry and steel, while the metal depth gauge sets precise maximum drilling depths for consistent anchor hole production and safe drilling through thin materials where over-penetration would cause damage. Power: 750W | Voltage: 220–240V~ 50/60Hz | Chuck: 13mm Metal Keyed (1/2") | Speed: 0–3,000 RPM | Impact: 0–48,000 BPM | Weight: 1.8kg The CAT DX17 — robust power, three-mode versatility, and the precision to handle every drilling challenge.