Reoval 3Pcs Garage Remote Control Keys, BFT MITTO 2B RCB, 433MHZ, 2 Button BFT Remote Control, Remote Control for Rolling BFT MITTO 2, Kleio, Ghibli, TRC 2

How to Program BFT Mitto: The following process will only work if the installer has enabled its control panel for remote programming. If the following process does not work, you will need the help of an approved BFT installer. You must be in the control panel. (It doesn't need to be open.) You will need a functional transmitter, already encoded in the system. and any new/replacement transmitter easily by hand. NOTE: The following sequence must be followed sequentially in rapid succession; any pause in the process will cause the system to run out. Read and familiarize yourself with the process before you begin. Programming Method: 1. Press the hidden button on the back of the transmitter already stored in the system for 2 seconds. (If you don't have hidden button, use the top two front buttons together instead.) 2. Press the operation button on the front of the transmitter already stored in the system for 2 seconds. 3. Press the hidden button on the back of the new transmitter for 2 seconds. (If you don't have hidden button, use the top two front buttons together instead.) 4. Press the desired button on the front of the new transmitter for 2 seconds. Repeat 3 and 4 for as many transmitters as they are added to the system, but make sure there is no pause between operations to prevent it from running low. 5. Please allow 20 seconds before attempting to use your new transmitter for the plate to reset. Coding is now complete. If this process does not allow your new transmitter or transmitters, please contact your local approved BFT installer.