MXBAOHENG Electric Hydraulic Crimping Tool Kit with 15 Moulds for Crimping Copper Terminals from 4-300mm² Aluminium Terminals from 4-240mm²

CAUTION: 1. The machine needs to add hydraulic oil to work, can not add too full, otherwise it will leak oil 2. After adding hydraulic oil for the first time, tighten the pressure relief valve, you need to keep pressing the switch for more than 10 seconds for the push shaft to push out!

15 CRIMPING DIES: Dies of 4, 6, 8, 10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 mm²; all grinding tools can crimp copper terminals within the range of 4-300 mm²; 300 mm² dies can only crimp aluminium terminals below 240 mm²

APPLICABLE MATERIALS: Electric hydraulic pliers are suitable for crimping DTL copper-aluminium terminals/DTL copper-aluminium excess/GTL copper and aluminium tubes/GTL copper-aluminium excess terminals with a thickness of ≤2.5mm

360 ° ROTATION PLER Head: Plier head can be rotated 360 ° easily crimp various angles of the terminal, accurate positioning crimping tight; high power all-copper motor, strong power output, crimping tight, smooth not blocking, easy to operate

KNOB RELIEF VALVE: When the electric hydraulic clamp is working, tighten the relief valve clockwise to keep the pressure; after the work is completed, loosen the relief valve counterclockwise, the machine back to the oil pusher shaft automatically retracted; one-key reset to improve work efficiency

OIL STORAGE Tank: Capacity 20ML, the machine will not work without adding hydraulic oil in the oil storage tank. Note: only hydraulic oil can be used

APPLICATION: Hydraulic clamp tool set can be used in communication, electric power, transport, shipbuilding, petrochemical, metallurgy and other industries, to meet your different needs