Terma Radiator (Cen./Heating), Steel, Metallic Grey, 1800h x 588w (mm) Double Panel [5555 BTUs t50]

Forte is a flat bar range of designer radiators available in both single or double panel variants; each bar is 70mm wide with a small gap which creates a very seamless looking design set against the wall. This Forte double panel (V20) model is manufactured from a double layer of flat steel profiles mounted on round rear collectors, with a very shallow projection of just 93mm including fixings. Note: Terma also offer a Forte single panel model (V10) which has a lower projection of 73mm.

The metallic grey (aka Anthracite) colour from Terma has a matt, rough texture. The Forte range have the unique feature that they can be installed either... vertically with the bars running up and down (valves connected on the sides)... or they can be installed horizontally with the bars running left to right (valves connected on the undersides). The same physical model you buy can be installed either way up giving maximum flexibility dependant on your space requirements.

As you rotate rad it changes the side view of the brackets; bars running vertically the brackets are on show, but with the bars running horizontally the brackets are fully concealed. Forte is pre fitted with an internal diverter (baffle) which is an aid to ensure even heat distribution. If being installed with the bars running vertically this should be left in place. If this is installed with the bars running horizontally this need to be tapped out.