Furniture Clinic Boiled Linseed Oil for Wood 250ml - Premium Oil to Enhance, Seal & Protect The Natural Beauty of Oak, Pine & Other Wood with a Glossy Finish (Pack of 5)

Similar to raw linseed oil, our Boiled Linseed Oil is a superior quality oil that has been treated with hot air, so it dries more quickly, forming a tough and hard-wearing finish, imparting a natural lustre. A traditional treatment that is suitable for use on all wooden surfaces (except exterior Oak), and can also be used on all porous stone, terracotta tiles and metal. Boiled Linseed Oil penetrates and seals the surface, providing protection for all interior and exterior surfaces. It provides an attractive, long lasting, and slightly glossy sheen. Compliant with Articles in Contact with Food Regulations, Boiled Linseed Oil is also ideal for the treatment of wooden furniture and utensils used in the kitchen and dining areas, where contact with food, spills, and exposure to water and other liquids are a frequent hazard to unprotected surfaces. Linseed oil is extracted from the seeds of the flax plant and then boiled to produce a high quality wood oil. Directions 1. Ensure the surface is clean, dry, and free from any contaminants. 2. Apply the Boiled Linseed Oil using a foam brush or lint-free cloth, following the grain of the wood. 3. Allow the first coat to dry for 24 hours. 4. Lightly sand the surface with fine-grit sandpaper and wipe off any dust. 5. Apply a second coat and let it dry for another 24 hours. 6. Apply a third coat for bare wood. 7. Allow the final coat to dry for 24 hours before using the surface. 8. Maintain the surface by reapplying the oil once a year or when signs of drying appear. 9. For best results, apply the oil in a well-ventilated area and avoid applying in direct sunlight or on hot surfaces.