KÄRCHER Kärcher SP 22.000 Dirt Level Sensor Submersible Pump for Dirty Water, Flow Rate: 22,000 l/h & 6.997-359.0 Anschluss (geeignet Fuer Saugschlauch 3/4 Zoll+ 1 Zoll)

Kärcher SP 22.000 Dirt Level Sensor Submersible Pump for Dirty Water, Flow Rate: 22,000 l/h, Immersion Depth: max. 7m, Particle Size: max. 30mm, Residual Water Height: 35mm, Pressure: 0.8 bar The Kärcher SP 22.000 Dirt Level Sensor submersible pump drains water efficiently from large ponds, flooded rooms or flooded construction pits at a rate of 22,000 litres per hour using 0.8 bar pressure. The robust pump with stainless steel housing, ceramic face seal and integrated prefilter, which can be used for heavy soiling, not only delivers great performance, but also great operation. It is suitable for dirty water containing particles up to 30mm in size. The automatic venting system ensures that the pump's performance stays consistent. The level sensor can be adjusted continuously and ensures that the pump switches on immediately when it comes into contact with water. If the water level falls below the level sensor, the pump switches itself off after 15 seconds. The automatic/manual switch makes it easy to swap between both types of operation, although continuous operation is also possible. The submersible pump drains down to a residual water height of 35mm if the level sensor is set accordingly. Hoses with standard 1-inch, 1 1/4-inch and 1 1/2-inch diameters can be connected to the pump. This just requires one click thanks to the Quick Connect connector. The scope of delivery includes the Kärcher SP 22.000 Dirt Level Sensor submersible water pump with integrated prefilter, Quick Connect connection for 1-inch, 1 1/4-inch and 1 1/2-inch hoses and a G1 1/2 connection thread. Kärcher 6.997-359.0 Anschluss (geeignet fuer Saugschlauch 3/4 Zoll+ 1 Zoll) Kärcher 6.997-359.0 Anschluss (geeignet fuer Saugschlauch 3/4 Zoll+ 1 Zoll) Das Pumpenanschlussstück dient dem vakuumfesten Anschluss von Saugschläuchen an Gartenpumpen, Hauswasserautomaten und Hauswasserwerke. Das Anschlussstück liefert die passende Lösung für Pumpen mit G1-Anschlussgewinde (33,3mm) und 3/4 Zoll- bzw. 1 Zoll-Schläuche. Im Lieferumfang sind eine Überwurfmutter, eine Schlauchklemme, eine Flachdichtung und ein Rückschlagventil enthalten. Das Rückschlagventil kann in Tauchpumpen oder Tauchdruckpumpen eingesetzt werden, um den Rücklauf des Wassers in die Pumpe zu verhindern. In allen anderen Fällen kommt die Flachdichtung anstelle des Rückschlagventils zum Einsatz.