ELUTENG M2 NVMe SSD to PCIe 4.0 x1 Adapter with Aluminum Heatsink, M.2 PCIe Adapter Supports PCI-Express X1 X4 X8 X16 Slots NVMe PCIe Card Low Profile Bracket Max 4TB Support 2230 2242 2260 2280 SSD

PCIE NVME adapterCompatible with M.2 PCIE (NVMe) M-Key/B&M key SSDs. *Note: M.2 NGFF (SATA) is not supported; PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.

Effective Heat DissipationAluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.

Wide Compatibility SupportPCIe 1X 4X / 8X / 16X. M.2 NVME to PCIE adapter card, corresponding to M-Key / B&M-key. *Note: Not support MSATA and B KEY interface.High Speed TransferThe M.2 to PCIE adapter card uses NVMe protocol and takes the PCI-E channel, with a maximum read/write speed of 16Gb/s (theoretical value), greatly reducing the transfer time of large files. ※Note: The actual transmission speed depends on the interface and working environment of the device.

Safe and StableSolid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size: 140*35mm (L*W), compatible with Windows 7/10/11 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system.

Packing List ELUTENG M.2 NVMe to PCIe 4.0 X1 Adapter Card, Accessories: long and short sound wall, 2 small screws, 1 thick screw, 1 screw for mounting the hard disk, 1 screw for each large and small size of the chassis, 1 screw, 2 blue thermal conductivity plates, 1 pink thermal conductivity plate and 1 screwdriver. (Refer to the seventh main image for details.)