PNI DCH218 dual battery and charger kit, with two USB ports, includes 2 18V 5Ah batteries

The batteries come partially charged from the factory. Fully charge the batteries before using the power tools with which they are compatible. Lithium batteries can be charged at any time, regardless of the discharge percentage without affecting their life span.

Do not charge other types of batteries than the recommended one (Li-Ion 7.2V - 18V). Risk of explosion! Note: do not force the battery into the slot on the charger. If it does not enter, it means that the battery is not compatible with this charger model.

Charger LED functions: The green LED blinks- charger is plugged in; The red LED blinks - The battery is too hot. Charging will start after the battery cools down; Red LED on - Charging in progress (0 - 80%); The red LED and green LED are lit simultaneously -Charging in progress (80% - 100%); Green LED on- Fully charged (100%); The green LED and red LED blink alternately -Battery or charger is defective.

Technical specifications Input voltage 100V - 240V 50-60Hz Output voltage 7.2V - 18V / 4A USB ports 2 x USB2.0 5V Batteries 2 x Li-Ion 18V 5Ah Charger dimensions 255 x 170 x 75 mm Battery dimensions 73 x 110 x 60 mm