Redunest Cabinet Pulls, 30 Pack 10 Inch Stainless Steel Gold Kitchen Handles, Square Drawer Pulls, Hole Centers 256mm, 10.5inch Overall Length, Modern Design

Good quality and not fade Form a complete set screw, convenient to use Comfortable to touch Great helper to pull out drawer, cabinets and other furniture Style: American Modern, stainless, simple and elegant design, also not easy to fade out. Notice: If you need specific length screws, please leave a message in the order. Step 1: The hole spacing of handles of different sizes is different, so it is necessary to use a tape measure to determine the hole spacing between handles, which must be accurate, because it is necessary to determine the drilling position of screw holes on the cabinet door. Step 2: First, determine the installation position of the cabinet door, which depends on the cabinet door, as well as the height of the cabinet and the position of the cabinet door. Generally, it is the best condition to take itself as the preferred condition, then directly compare the hole distance of the just measured handle vertically on the cabinet door plate, and then mark the hole position with a marking pen Step 3: Select a drill of appropriate size. Generally, the handle is a small hole position, and then use an electric drill to drill vertically at the marked position Step 4: Hold the cabinet door handle with your left hand, align the handle with the hole just punched, then pass the small screw through the hole from the back of the cabinet door, and tighten the screw with a screwdriver after alignment