TATUNER Bath Sealant Strip, Strong Self Adhesive Simple Seal Tape, Caulk Strips for Bathroom, Bathtub, Shower, Kitchen, Sink, Waterproof, Anti Mould, White (1)

Step-by-Step Installation Guide 1)Surface Preparation Clean the installation area thoroughly with alcohol or detergent to remove dust, oil, and water stains. Ensure the surface is dry and flat (moisture reduces adhesion). Suitable for smooth materials like bath edges, toilet perimeters, kitchen sinks, and tile joints. 2)Measurement & Cutting Cut the tape to length with scissors, leaving a 1-2cm excess for adjustment. The pre-scored design bends easily to fit 90° internal/external corners, ideal for complex areas like bathroom corners and shower tray edges—no professional tools needed. 3)Application & Pressing Peel off the backing paper, apply slowly from one end, and press the tape firmly with fingers or the included tool to expel air bubbles. Ensure full contact with the gap edge to prevent curling. 4)Edge Trimming Trim excess tape with a blade. Avoid water contact for 24 hours to allow full curing. Before Use: Do not apply to unpainted surfaces, latex-painted walls, or rough cement. Recommended materials: ceramic, glass, metal, glazed tiles (aligns with ""self adhesive on tiles""). After Use: Clean with a damp cloth—scrub-resistant material withstands bathroom cleaners and kitchen oils (""oil-resistant""). To remove, heat the tape surface and peel slowly. Use alcohol to remove residue without damaging the base. Storage: Keep in a cool, dry place, away from direct sunlight or heat sources. Use within 6 months after opening. Ps：In low temperatures (<15°C), preheat the tape back with a hair dryer on low setting for 10-15 seconds to activate adhesion