PremiumCord 4K Active Optical (AOC) HDMI 2.0 Fibre Optic Cable M/M 18Gbps, Compatible with Video 4K @ 60Hz, Deep Colour, 3D, ARC, HDR, Dolby Gold-Plated Connectors, Black, 3 m

PremiumCord 4K Active Optical (AOC) HDMI 2.0 Fibre Optic Cable M/M 18 Gbps, Compatible with Video 4K @ 60Hz, Deep Colour, 3D, ARC, HDR, Dolby TrueHD, Gold-Plated Connectors, Black The optical 4K@60Hz HDMI high speed cable is used to connect two audio/video devices via a modern HDMI interface such as an HD DVD/Blu-Ray player and an LCD/Plasma TV. The cable transmits both digital audio and video and supports digital protection of HDCP content. Gold-plated connectors in metal caps: HDMI A male (19-pin) HDMI A male (19-pin) The cable contains active electronics that only works in one direction of the signal. Parameters: - Supports Ultra High Definition Resolution 4K @ 60Hz (2160p @ 60Hz), YUV 4:4:4 - Maximum data transfer via HDMI 2.0: 18 Gbps (600 MHz) - Maximum data transfer via HDMI 1.4: 10.2 Gbps - Resolution: 3840 × 2160 pixels at 60Hz or less supports 1080p FULL HD / 1080i / 720p / 720i - The optical cable is backward compatible with HDMI 2.0a, 2.0, 1.4 and lower - Supports ARC, HEC, EDID, DDC - Supports CEC (Consumer Electronics Control) - Supports HDR (High Dynamic Range) - Supports 4:4:4 color subsampling - 3D video via HDMI connection - Supports HDCP1.4 / HDCP2.2 - Supported multi-dimensional audio formats (Dolby Atmos and DTS: X, etc.) - Dolby TrueHD and DTS-HD master audio bitstream compatible - Supports Audio Return Channel (ARC) - Compatible with HDMI Ethernet Channel (HEC) - EDID support. Cable Construction: - Gold-plated connectors: from HDMI male type A (19 pins) to HDMI male type A (19 pins) - Hybrid optical cable - 4x fibre optic + 7x wires - Optical cable thickness: 4.6 mm. - Fiber Optic: OM3 Multimode Fiber - Gold-plated connectors in metal caps. - Flexible optical cable for small bending radius: 20 mm - Black colour. - Full power supply with HDMI bus consumption of less than 250mW, no external power required - The optical cable is wrapped and labeled with a description and an EAN code Note: The cable must always be connected with devices switched off and only in the direction indicated on the cable. The Source designated port is always connected to a broadcast device (DVD, Blueray). The display connector is always connected to the display device (LCD, TV, projector).