Ambition Soldier Tattoo Kit - Wireless Tattoo Machine Kit Complete Rotary Tattoo Machine with Extra 2400mah Power 120pcs Glory Mixed Size Cartridge Needles for Professional Tattoo Artists

Once you go wireless, you will love Ambition tattoo machine equipment. Experience the freedom of going wireless by turning your favorite tattoo machine into a wireless machine. Material: space aluminium alloy Needle Stroke: 4.0mm Motor: Coreless Motor. Ambition Coreless motor is good with lining, shading, color packing, lettering, traditional, neotraditional. Motor Speed: 10V - 9000RPM One Battery Capacity: 2400mAh, built-in 3x 800mAh lithium battery Charging time: 2-3 hours Operation time: Under normal 8V voltage, the voltage stable state can last for more than 10 hours, long time working the voltage is stable. Output fixed current：2A Working voltage: 3.7V Output Voltage : 5V-12V LED display content: output voltage range + battery usage + working time Instructions for use: - Power ON/OFF: Long press "O" key for 3 seconds - Output pause / resume: Short press "O" key to pause the output, and short press it again to resume the output(the resume voltage is the working voltage before the pause). - Adjust output voltage: Press the "+" or"-" key to adjust output voltage. The voltage can be adjusted through button (+) and (-) respectively with the voltage of 0.1V on each press. - Working time: The working time can be accurate to minutes. When the power is turned off, the time will be cleared. When the output is paused, it will also stop counting. Power: The LED display will show the remaining power, and the full power will display 4 divisions. Fast charging through the matching fast-charging cable can usually be fully charged in 2-3 hours. Please pay attention to the change of power at any time to prevent sudden power loss from affecting your tattooing work. Directions 1. Open the package and remove all components. 2. Fully charge the battery using the matching fast-charging cable. 3. Install a cartridge needle onto the tattoo machine. 4. Connect the RCA adapter to the tattoo machine and the power cable. 5. Power on the tattoo machine by long-pressing the 'O' key for 3 seconds. 6. Adjust the output voltage using the '+' or '-' keys. 7. Start tattooing, and pause or resume output by short-pressing the 'O' key. 8. Monitor the LED display for battery usage and working time information. 9. Replace the battery when needed, which takes about 2-3 hours to fully charge. 10. Clean and maintain the tattoo machine and components as necessary.