PARKVISION Reversing Camera for Car, Wired Rear View Reverse Camera with Adjustable Lens, Metal Housing, Screw Installation & 6m Video Cable Kit – 12V-24V

Fits Most Vehicles - 140° wide angle coverage reversing camera for car with a slim metal housing that mounts to the licence plate, so it sits neatly behind the plate and doesn't trash the bodywork. Works as a rear view reverse camera on most cars, 4×4s and vans with a 12V system. Check the dimension drawing in the photos before ordering — two minutes with a ruler saves a return

Wired, Stable Picture, Comes With 6 m Video Cable & RCA Connector - This is a wired reverse camera, so you get a steadier image than most wireless kits (no drop-outs as you reverse). The box includes the reversing camera body, parts, and a 6 m (20 ft) video cable to reach your dashboard head unit . Run the cable with the reverse-light feed, tuck it behind trim, and you're done — no mystery signal loss, no "no signal" panic at the lights

Adjustable Lens with 140° Wide View Angle - The fully adjustable metal lens housing rotates so you can set the viewing angle exactly where you need it — down far enough to see the bumper/curb, not so high you're filming the sky. The wide angle lens improves rear coverage when you're reversing into tight bays, supermarket spaces, or narrow driveways, and helps with parallel parking by reducing what's hidden by the boot / tailgate and rear pillars

Rain, Spray & Freezing Temps — Built with a zinc alloy (metal) body and proper seals for waterproofing, this rear view camera is made for British weather — not just a sunny afternoon. The result is a cleaner image over time because the lens area stays sealed and the housing doesn't go chalky or crack like cheap plastics

Parking Guidelines & Mirror/Normal Image Switches, No Menus - Use the inline switch leads to turn the parking guidelines / parking lines ON or OFF, and flip between Mirror mode (standard for reversing) and Normal mode if you ever re-purpose it. Restart the power (pop the reverse light off/on) to apply. Keep the install tidy: red wire → reverse light +12V, black → chassis ground, and stick to the supplied cable set to avoid flicker or "no signal" issues