youkzuan Precise Tile Cutter Tools,Professional Manual Tile Cutter for Porcelain/Ceramic Tiles,Capable Cutter 48' Large Format Tiles,1Pc Running Plier,3Pcs Tungsten Scoring Wheels,3Pcs Cutter Heads

️Easy to cutter tiles/glass: The tile cutter is very light(only:1.5bl), and the tungsten carbide scoring wheel is sharp. Just press the hand holding the orange handle down to slide, and you can easily draw lines on the tiles

️Cutting size: Maximum cutting length: can be greater than 48 inches (1200mm), it is recommended not to exceed 120 inches (300mm); maximum direct cutting width: 48 inches (1200mm) can be cut through clever methods; cutting thickness: 0.24' - 0.6' (6mm - 15mm); minimum cutting width: 1.97' (50mm)

️Reasonable structure: The breaking pliers are die-cast from aviation aluminum. The main body of the manual tile cutter is made of alloy material, which is very strong and durable. The laser scale is used on the ruler surface, with two units of inch and cm, which fully conforms to your usage habits

️Rich Accessories: Including 1Pc professional ceramic tile cutter, 1Pc upgrade 4.0 Running Plier, 3Pcs Cutter Heads, 2Pcs 22mm tile cutter replacement wheels (Cutter Heads and replacement wheels can be used according to your preference, Can cut tiles/glass normally), easy to install and easy to operate

️Note: When using, put your left hand on the left side of the porcelain tile cutter(if you are right handed), and the 20 nylon wheels under the control are closely attached to the side of the tile. Put your right hand on the orange handle and you need to press down and down gently, and use it after seeing obvious scratches Use pliers to open it, and if the scratch is not obvious enough, you can repeat the operation with manual tile cutter again. Try to avoid frontal bumps on tile cutter wheel