Halder HALDER Mallet with Vibration-Absorbing Ergonomically Shaped and Painted Hickory Handle Diameter 100 mm Weight 5000 g 3366.0S5

The head tube of the SCHLEGEL is filled with steel shot. This means that when the impact of the striking surface on the workpiece the scrap filling follows with a delay. Thanks to the reduced rebound, the impact energy is optimally utilised. This makes very powerful strikes possible. In addition, working with the mallets is significantly more gentle on the joints and quieter than with ordinary steel hammers. The interchangeable inserts made of special nylon are very wear-resistant, low noise, splinter-free and suitable for very high impact forces. In addition, they are flat and allow the gentle hammering of wooden stakes without damaging them. The robot-welded hammer head has an integrated handle protection sleeve. The long-fibred, very stable hickory handle is painted and ergonomically shaped. This product is available in three versions: head diameter D80mm with 3,600g total weight, head diameter D100mm with 5,000g total weight and 6,500g total weight. Product Features: Kick-free mallet for very powerful strokes and joint-friendly, quiet work. Highly wear-resistant, replaceable, splinter-free, flat impact inserts made of special nylon. Robot welded hammer head with handle protection sleeve. Long-fibred, very stable hickory handle, painted and ergonomically shaped. Available in D80 mm (total weight 3,600) and D100 mm (total weight 5,000 g and 6,500 g). Areas of application: Wooden stakes hammering ATTENTION: Steel scrap filling in the hammer head is not sealed and may fall out when removing the inserts. Not suitable for use in sensitive environments / industry. Material: Inserts Nylon, white. flat. Hard Very wear-resistant. No chipping (even at sub-zero temperatures). Low noise. For very high impact power. stalk hickory