WAGO Original Connection Terminal Set 887-952 - L-BOXX Mini - Series 221 Bundle with UTRONIX Wagobox Junction Box Pack of 10, grey

wago 887-952 WAGOBOX Junction Box Fast to Install Installing a Wagobox can take as little as 25% of the time it takes to install a BS6220 style junction box. All the cables can be stripped back to as installer friendly 60mm before fitting the terminal blocks. The Wagobox uses Wago 222 & 773 Series terminal blocks which are quick to fit but as these are also fitted outside of the box there is none of the time consuming fiddling about trying to get the cables cut to size and into position inside a small space. Easy to Use The Wagobox has been designed to be easy to use with the Wago 773 and 222 Series of terminal blocks. Once the cables have been connected, the terminal blocks can be easily slid into position before securing the cables. The cable gripper is very easy to configure, no screws or fiddly clamp bars in this box. Each gripper slot has it's own black plastic pressure spring that can be installed into one of two slots or simply removed. Use a pair of cutters or narrow nosed pliers to position the gripper spring and then push the cables into position. The cables will be clamped and secure in a matter of a few seconds. Totally Secure The integrated cable gripper can secure flex and 6242Y and 6243Y cables from 1.0mm2 to 6.0mm2 in seconds. The snap shut lid locks into place and closes the gripper slots preventing any cables from working free. 39mm x 44mm x 108mm Adaptable From the position of the gripper to the choice of the terminal blocks the Wagobox can be configured to suit the job. Connecting LV lighting transformers, distributing power to multiple loads or simply extending an oven circuit are all possible with the Wagobox. Sold in Packs of 10