BLUESKY Bluesky Gel Polish Starter Kit - Pastel Neons With 24W UV LED Lamp Dryer, 3 x 10ml Polishes, Cleanser Wipes, Top and Base Coat, File and Buffer

Everything you need to get started with gel polish! This Bluesky gel nail kit gives you all the essentials you need to get started with beautiful gel manicures and pedicures from the comfort of your own home. Preparation is everything..... 1. Use the Bluesky Nail file to file your nails to the desired shape. 2. Push back and trim your cuticles. 3. Gently buff your nails with your Bluesky nail buffer. 4. Clean your nails with a Bluesky cleanser wipe. How to apply gel polish Apply the gel remembering, the thinner the coats the better the finish. 1. Apply a thin layer of Bluesky Base coat to all five nails, capping the ends. Avoid the skin and cuticle. 2. Cure for 60 seconds under the Bluesky lamp, it will still be tacky but this is normal. 3. Apply your chosen colour Coat in the same way as the base coat; a thin coat, cap the end, avoid your skin. 4. Cure the Gel Polish for 60 seconds. 5. Repeat steps 7 and 8 building up the colour each time. One coat will give a sheer finish, two is normal, three will be a solid colour. 6. Apply a thin layer of Bluesky Top coat just like all the others. 7. Cure the Gel top coat for 60 seconds. Directions Apply Base Coat, then cure under the LED/UV lamp for 60 seconds. Apply 3 coats of color, curing for 60 seconds after each coat. Apply Top Coat, then cure for 60 seconds. Use cleanser wipes to remove any residue. File and buff nails as needed. For gel removal, soak nails in acetone for 10-15 minutes, then gently scrape off the gel. Always follow safety precautions, including avoiding contact with eyes and not ingesting any products. Safety Warning For external use only. Avoid contact with eyes. Keep away from naked flame or direct heat sources.