Emoobin 15m Pressure Washer Replacement Hose for Karcher K Series Pressure Washer K2 K3 K4 K5 K6 K7 Click Plug Quick Connector (15)

Emoobin high-pressure replacement hose is compatible with Karcher K series pressure washer (K2-K7) from 2009 or later, where the hose is connected to the gun and pressure washer to the quick connection. Specifications: Hose material: Brass and Rubber Inter Diameter：9 mm Outer Diameter：12 mm Length: 15 m (49.2") Maximum temperature: 60℃ / 140℉ Maximum Pressure: 180 bar / 2610 psi Burst Pressure: 540 bar / 7830 psi Outlet connection: clip type quick connector Outlet connector type: applicable to quick plug type (this hose does not have a built-in quick plug) Note: 1. This is not an original Karcher product. 2. Use the quick connection system to connect the nozzle to the hose. This high pressure hose is not suitable for Kärcher nozzles with a 10 mm plug-in system into the nozzle input. 3. Our pressure washer hose only fits the new style of Tiger guns with quick release/quick release, and your tiger must have a yellow button (not black), then our hose will work. 4. Not compatible with models that have a hose on board and not with Archer K1700 Cube, K1700, K1800, K1900 and K2000. 5. Not compatible with the older Kärcher M22 output. An adapter is required to convert your old Karcher models into a quick connector. Precautions: 1. When the temperature drops below 5°C, be sure to remove the water from the hose before storing. It may cause damage due to freezing. 2. Never use above the maximum working pressure. 3. If water leakage occurs, please check whether the joints are tightly plugged, if necessary, you can use waterproof tape to wrap it. Guarantee: We have 1 year quality service, if something is not satisfied, please do not hesitate to contact us, we will solve your problem 100%.